Register Now

4*60 · 01-11-2004, 04:02 PM

Has anyone taken advantage of the Servocity deal - 2 packs for $140US?
Sounds unreal. What's the catch?

Hughes500E · 01-11-2004, 07:34 PM

Servo City is a good place however, do the math. After you pay the exchange and taxes and shipping, it may be just as good to support your local guy and have the support/warranty.
I bet that your getting non bearing servos as well. I doubt that 425's will be included.

4*60 · 01-12-2004, 01:38 AM

Non-bearing is correct. I haven't had a problem with 422's anywhere. ??
I have some 425bb's. Maybe I'll use the 422's for throttle and ailerons.

Taxes are paid whether I buy locally or transborder, since there is no duty.

Exchange = $91CDN / pack including crystal.

Good point about local support, although warranty is available through Hitec, no matter what. Ask me how I know with 300's.

So, I guess the non-bearing bit, is the major??

Thank you for the input!! Any other input appreciated.

Hughes500E · 01-12-2004, 02:11 AM

Email them ask how much for shipping

I paid major dollars on shipping for a Receiver that was on sale!
14.00 US dollars I believe plus a 5.00 fee on top of the taxes at the border.
Servo city is a good outfit. I'd phone Kerry myself though

01-11-2004, 04:02 PM	#1
4*60 RCC Supreme Contributor I am: DSM Join Date: Sep 2002 Location: Shuswap/Blind Bay Radio of choice: Radiomaster, Taranis # of RCs: 14 Feedback: 15 / 100% Posts: 3,931 Total Props: 199	Hitec flight packs - almost 2 for 1?? Remove this ad - become a site supporter! Has anyone taken advantage of the Servocity deal - 2 packs for $140US? Sounds unreal. What's the catch?
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2004, 07:34 PM	#2
Hughes500E RCC Supreme Contributor I am: Steve H. Join Date: Feb 2003 Location: Armstrong BC Feedback: 34 / 100% Posts: 3,757 Total Props: 16	Servo City is a good place however, do the math. After you pay the exchange and taxes and shipping, it may be just as good to support your local guy and have the support/warranty. I bet that your getting non bearing servos as well. I doubt that 425's will be included.
	.

01-12-2004, 01:38 AM	#3
4*60 RCC Supreme Contributor I am: DSM Join Date: Sep 2002 Location: Shuswap/Blind Bay Radio of choice: Radiomaster, Taranis # of RCs: 14 Feedback: 15 / 100% Posts: 3,931 Total Props: 199	Non-bearing is correct. I haven't had a problem with 422's anywhere. ?? I have some 425bb's. Maybe I'll use the 422's for throttle and ailerons. Taxes are paid whether I buy locally or transborder, since there is no duty. Exchange = $91CDN / pack including crystal. Good point about local support, although warranty is available through Hitec, no matter what. Ask me how I know with 300's. So, I guess the non-bearing bit, is the major?? Thank you for the input!! Any other input appreciated.
	.

01-12-2004, 02:11 AM	#4
Hughes500E RCC Supreme Contributor I am: Steve H. Join Date: Feb 2003 Location: Armstrong BC Feedback: 34 / 100% Posts: 3,757 Total Props: 16	Email them ask how much for shipping I paid major dollars on shipping for a Receiver that was on sale! 14.00 US dollars I believe plus a 5.00 fee on top of the taxes at the border. Servo city is a good outfit. I'd phone Kerry myself though
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in