Register Now

Bimd@pogs · 05-23-2008, 07:48 PM

Hi guys,
Need some help here. I tried to install a JR radio system (XS3 + RS310) on my Revo. My problem is that the Opti-Drive doesnt want my JR. I can steer, but throttle, brake and shifter won't respond. Did anybody encounter the same problem? How do I fix this? Is it the radio? I just don't like the TQ3.

Thanks in advance,
Marvin

mpetre · 05-23-2008, 09:32 PM

That radio should work fine. Recheck that you have the correct servos plugged in the proper channel and the receiver battery is charged. The opti-drive only controls the shift servo so I am thinking you have something plugged in wrong.

imported_johnny4good · 05-23-2008, 09:44 PM

Why does my throttle (or other specific control surface) not respond today when I had full control yesterday? Return to Top
This can happen for several reasons. To fix:
A. Check that the travel adjust is not set at zero or low value.

B. Try switching to another model memory that hasn't been programmed and re-check to see if control has returned.

C. Check to see if servo is properly connected and/or try another servo.

cyclop · 05-23-2008, 10:50 PM

also make sure the frequency hasnt been changed and are matched up on rx and tx ..

Bimd@pogs · 05-24-2008, 11:27 AM

thanks guys! everything is now figured out. i went back to radio manual. after i reset the memory, everything went out right. thanks for your help!

cheers!

05-23-2008, 07:48 PM	#1
Bimd@pogs RCC Apprentice Join Date: Sep 2007 Feedback: 0 / 0% Posts: 93 Total Props: 0	Compatible Aftermarket Radio for Revo's Opti-Drive Remove this ad - become a site supporter! Hi guys, Need some help here. I tried to install a JR radio system (XS3 + RS310) on my Revo. My problem is that the Opti-Drive doesnt want my JR. I can steer, but throttle, brake and shifter won't respond. Did anybody encounter the same problem? How do I fix this? Is it the radio? I just don't like the TQ3. Thanks in advance, Marvin
	.

05-23-2008, 09:32 PM	#2
mpetre "F" Main Join Date: Dec 2006 Feedback: 0 / 0% Posts: 714 Total Props: 0	revo That radio should work fine. Recheck that you have the correct servos plugged in the proper channel and the receiver battery is charged. The opti-drive only controls the shift servo so I am thinking you have something plugged in wrong. __________________ Martin Petre Mugen Seiki Team Driver Byron Fuels Skycraft Hobbies 2005 + 2007 Sammy's S.S. 1/8 buggy champ 2007& 08 GLORCS MT Champion 2008 Southern Ontario indoor MT Champion 2009 Canadian Winter nats 3rd 1/8 Pro Buggy
	.

05-23-2008, 09:44 PM	#3
imported_johnny4good RCC Apprentice Join Date: Oct 2007 Feedback: 0 / 0% Posts: 94 Total Props: 0	Might help Why does my throttle (or other specific control surface) not respond today when I had full control yesterday? Return to Top This can happen for several reasons. To fix: A. Check that the travel adjust is not set at zero or low value. B. Try switching to another model memory that hasn't been programmed and re-check to see if control has returned. C. Check to see if servo is properly connected and/or try another servo.
	.

05-23-2008, 10:50 PM	#4
cyclop RCC Master Contributor Join Date: Mar 2005 Feedback: 0 / 0% Posts: 1,007 Total Props: 0	also make sure the frequency hasnt been changed and are matched up on rx and tx .. __________________ 72 Capricorn Cat With Twins 58 ForaBuck Cat mod zen
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-24-2008, 11:27 AM	#5
Bimd@pogs RCC Apprentice Join Date: Sep 2007 Feedback: 0 / 0% Posts: 93 Total Props: 0	thanks guys! everything is now figured out. i went back to radio manual. after i reset the memory, everything went out right. thanks for your help! cheers!
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in