|
|
04-03-2005, 02:44 PM | #13 |
RCC Senior Contributor
|
Here is what will finish it off.....
1. Proline bowties 2. Travel Limiter (this is a piece of wire, nylon etc that limits the downward travel of the suspension. very easy to do utilizing the lower shock holes on the a are and drilling a hole in the shock tower, pics when its done) 3. Personal Transponder 4. 2300mah Hump Pack 5. .26 or .28 motor (have to wait another month) 6. Aluminum Shocks all around with purple springs 7. high torque steering servo and cam type servo saver. |
. |
|
|
04-06-2005, 06:42 AM | #14 |
Looks good, you removed more material than what is required from the engine brace, but you'll still be fine.
You should really think about doing the center tank mod. You'd be really surprised to see the difference it makes in handling. And the stock S-25 tank fit's perfectly using holes provided. PB |
|
. |
04-06-2005, 04:21 PM | #15 |
RCC Senior Contributor
|
I was thinking about that... but over the last little while i have had NO LUCk whatsoever with tanks.
I have busted 3 in the last month (if you saw me drive you would understand "Flying Welenda Ferret!") Could you detail how to do the mod for me though? I would be interested in reading up on it. And I do realize I removed more material than was truly necessary. But it was trial and error for me. I must admit though, when I took off as much as I did, it made getting the dog bone in place easier. |
. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|