[wollins]

Guys, are there any multi pin connectors out there that have more than the four servo capacity of the MPX (Multiplex clones) connectors? Since I need six connections via my wing, I'll need to use two of my MPX ones (capability of four connections each) so I'd love to find connectors that have more so that I can just do ONE connector for my wing.

Basically I just need a six servo capable multi pin connector. An 8 pin example can be seen here. Any suggestions where I might find something like this locally? (I'm in Toronto)

Thanks!

Colin

[Dangaras]

AMP makes a connector available from Digikey.

https://www.rccanada.ca/rccforum/showthread.php?t=196272

They are sold as T-bolt connectors by thundrboltrc.com or already assembled by Altecare RC..

http://www.altecare.com/ashlock.htm

[wollins]

Thanks Dangaras, here's the problem with those ... far as I can tell they only come four servo capable (I need six) and to do a proper job you need a crimper ... and they're expensive! Hence my search ...

Colin

[Dangaras]

You can get 2 x 3 servo connectors and either paint to identify or glue the pair together...

The Altecare RC guys sell them wil 6 inch leads all put together.

PS, I dont use crimpers, I use a good pair of needle nose pliers.

[grizak]

We make TBolt Multi-Servo Harnesses in 3 sizes (6" leads, 12" leads, 24" leads) - here is the link:

http://www.thunderboltrc.com/index.p...ndex&cPath=153

If you need a 6 servo configuration - get a 4 servo harness and a 2 servo harness.

Thanks,

Grizak