Register Now

uk.expat · 06-26-2011, 03:58 PM

Hi guys, I know you can help me,I bought a plane last week with a Spektrum receiver AR 6200 installed,I fly 72 megs at the moment,I thought it might be a good time to go 2.4 megs,I borrowed a DX7 Tx brand new to test the system, my buddy has not used it yet.How can I get the rx which was bound to another tx to bind to this one, Thanks for any help.

Beerwiser · 06-26-2011, 04:50 PM

http://www.robotmarketplace.com/prod.../SPMAR6200.pdf
To get the Tx into bind mode hold the bind button down while turning on the Tx.

uk.expat · 06-26-2011, 06:12 PM

Thanks for your reply,part of the trouble was,a normal 2 wire + - on off switch is fitted in the plane,the manual shows a 3 wire switch,the bind plug is plugged into the charge lead,I made a female plug with the signal linked across to the negative pole ie white to black .I inserted it into the receiver,to instigate the bind,then removed it,all is working now.Hope this helps anyone else that comes across it.Cheers RC Canada

06-26-2011, 03:58 PM	#1
uk.expat RCC Junior Contributor I am: wilf coggins Join Date: Oct 2010 Location: sudbury ontario Radio of choice: Futaba 7c Spektrum DX8 # of RCs: 10 Feedback: 1 / 100% Posts: 114 Total Props: 1	help req.with binding Spektrum receiver Remove this ad - become a site supporter! Hi guys, I know you can help me,I bought a plane last week with a Spektrum receiver AR 6200 installed,I fly 72 megs at the moment,I thought it might be a good time to go 2.4 megs,I borrowed a DX7 Tx brand new to test the system, my buddy has not used it yet.How can I get the rx which was bound to another tx to bind to this one, Thanks for any help.
	.

06-26-2011, 04:50 PM	#2
Beerwiser RCC Contributor I am: Ted Join Date: Apr 2011 Location: Mundare Ab Radio of choice: dx8 # of RCs: 4 Feedback: 7 / 100% Posts: 395 Total Props: 12	Re: help req.with binding Spektrum receiver http://www.robotmarketplace.com/prod.../SPMAR6200.pdf To get the Tx into bind mode hold the bind button down while turning on the Tx.
	.

06-26-2011, 06:12 PM	#3
uk.expat RCC Junior Contributor I am: wilf coggins Join Date: Oct 2010 Location: sudbury ontario Radio of choice: Futaba 7c Spektrum DX8 # of RCs: 10 Feedback: 1 / 100% Posts: 114 Total Props: 1	Re: help req.with binding Spektrum receiver Thanks for your reply,part of the trouble was,a normal 2 wire + - on off switch is fitted in the plane,the manual shows a 3 wire switch,the bind plug is plugged into the charge lead,I made a female plug with the signal linked across to the negative pole ie white to black .I inserted it into the receiver,to instigate the bind,then removed it,all is working now.Hope this helps anyone else that comes across it.Cheers RC Canada
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spektrum Rx differences & binding questions. Help.	Gary Maker	Electronics	13	03-28-2010 01:01 AM
MAAC Spektrum Binding Issue Notice	cjensen	Electronics	16	07-11-2009 06:46 AM
Spektrum binding issue	Hot_Dog	Electronics	3	04-11-2008 12:41 PM
X9303 R921 RECEIVER BINDING PROBLEM ??	HOMEFLYR	Electronics	1	02-13-2008 11:18 PM
dead stick req.	j-coles	General RC Aircraft Discussion	19	03-09-2006 02:12 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in