Register Now

offroadjr · 04-21-2008, 07:08 PM

ok i terned it on to run my savage today and i needed to adjust the trim and coulded. i see some thing new on the screen that was not there before it is TRM. i can not adjust the steering of the throttle using the trim. if i have to wipe it out how do i do it.

c-low74 · 04-21-2008, 07:59 PM

that cause you turned the control lock on some how

you have to push and hold the button again to unlock it

hyper7boy · 04-21-2008, 09:38 PM

if you have the 3PK super you have to press and hold the (-) button for apprx. 1 second. Make sure you keep an eye on the screen...when if goes away, let go of the (-) button. Also, if you hold that button for too long it will just come back after it goes away. Also, the same thing can happen with EDT. If that appears on your screen, then do the same proccess I just evplained but this time with the (+) button. Both keys are located just under your screen. If additional instructions are required, refer to pg.22 in the Owner's Manual!! Hope this helps!

offroadjr · 04-21-2008, 09:57 PM

thank you c-low74 and hyper7boy for your help. the (-) that did it

hyper7boy · 04-22-2008, 02:10 PM

glad to hear it worked for you!

04-21-2008, 07:08 PM	#1
offroadjr RCC Junior Contributor Join Date: Jan 2005 Feedback: 0 / 0% Posts: 220 Total Props: 0	need hlp with my 3pk Remove this ad - become a site supporter! ok i terned it on to run my savage today and i needed to adjust the trim and coulded. i see some thing new on the screen that was not there before it is TRM. i can not adjust the steering of the throttle using the trim. if i have to wipe it out how do i do it. __________________ mugen mbx5-t prospec x2 wheely king rockcrawler axial scorpion xxx-4 revo 3.3 racer Savage Axiol 28 3 speed(that has been 2 hell and back and wants more) Rc18t Momba Comp X micro mini-t tamiya Mo3-M tamiya TG-10 GS-CL-1 G.R.D RACING
	.

04-21-2008, 07:59 PM	#2
c-low74 RCC Pro Contributor Join Date: Aug 2004 Feedback: 0 / 0% Posts: 1,572 Total Props: 0	that cause you turned the control lock on some how you have to push and hold the button again to unlock it __________________ www.eclipserc.com www.bannedrc.com
	.

04-21-2008, 09:57 PM	#4
offroadjr RCC Junior Contributor Join Date: Jan 2005 Feedback: 0 / 0% Posts: 220 Total Props: 0	thank you c-low74 and hyper7boy for your help. the (-) that did it __________________ mugen mbx5-t prospec x2 wheely king rockcrawler axial scorpion xxx-4 revo 3.3 racer Savage Axiol 28 3 speed(that has been 2 hell and back and wants more) Rc18t Momba Comp X micro mini-t tamiya Mo3-M tamiya TG-10 GS-CL-1 G.R.D RACING
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2008, 09:38 PM	#3
hyper7boy RCC Senior Contributor I am: Mike R. Join Date: Apr 2007 Location: Oakville, ON Feedback: 0 / 0% Posts: 593 Total Props: 0	if you have the 3PK super you have to press and hold the (-) button for apprx. 1 second. Make sure you keep an eye on the screen...when if goes away, let go of the (-) button. Also, if you hold that button for too long it will just come back after it goes away. Also, the same thing can happen with EDT. If that appears on your screen, then do the same proccess I just evplained but this time with the (+) button. Both keys are located just under your screen. If additional instructions are required, refer to pg.22 in the Owner's Manual!! Hope this helps!
	.

04-22-2008, 02:10 PM	#5
hyper7boy RCC Senior Contributor I am: Mike R. Join Date: Apr 2007 Location: Oakville, ON Feedback: 0 / 0% Posts: 593 Total Props: 0	glad to hear it worked for you!
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in