[scaleguy]

Originally Posted by funtvrk

So when a Heli is listed as a bind and fly would it have then one of the orange recievers in it to work with any transmiter?

if you are going to buy more BNF stuff you re better off with a DX8, DX8 or better yet a JR9503 which gives you DSM2 for all the bnf stuff out there or if you buy a new JR9503 you will have DSMX and DSM2.

Your Futaba can only work with the Futaba RXs listed above and some HK orange stuff.

[Kargon]

Originally Posted by funtvrk

So when a Heli is listed as a bind and fly would it have then one of the orange recievers in it to work with any transmiter?

You will have to get one of thease for your Tx in order to use on all bind-n-fly aircraft

http://www.towerhobbies.com/products...nes/index.html

[philipa_240sx]

Originally Posted by funtvrk

So when a Heli is listed as a bind and fly would it have then one of the orange recievers in it to work with any transmiter?

Bind-N-Fly ONLY works with Spektrum or JR DSM2/DSMX transmitters. They DO NOT work with Futaba, Airtronics, etc.

Originally Posted by scaleguy

if you are going to buy more BNF stuff you re better off with a DX8, DX8 or better yet a JR9503 which gives you DSM2 for all the bnf stuff out there or if you buy a new JR9503 you will have DSMX and DSM2.

Your Futaba can only work with the Futaba RXs listed above and some HK orange stuff.

+1 I own a DX8, great radio.

[funtvrk]

Thanks for the suggestion, I will pick one up and let you know how well it works.

[Kargon]

Originally Posted by philipa_240sx

Bind-N-Fly ONLY works with Spektrum or JR DSM2/DSMX transmitters. They DO NOT work with Futaba, Airtronics, etc.

You are right. ANY-LINK is not compatible with Bind-n-Fly.

Karl

[funtvrk]

Well they claim it does so for the $29 I'm going to give it a shot anyway

[funtvrk]

They claim it will also work with a 72khz radio to bind with a 2.4 receiver, like I said I will pick one up tonight and let you know how it works with these radio's

[astrofler]

Bind-N-Fly ONLY works with Spektrum or JR DSM2/DSMX transmitters. They DO NOT work with Futaba, Airtronics, etc.

not quite true, but close. Bind and fly works perfectly with the spectrum transmitter module that fits a number of futaba transmitters such as the 9c 10c etc.

also my take on the ANY-LINK is that you need an SLC receiver for this system to work. There are a number of planes coming out with this system, but it is not a matter of buying just the ANY-LINK for the transmitter and you're good to go. You need their receiver or a plane equipped with their receiver.

[funtvrk]

hi
Astrofler you where correct, it will bind only with the receivers and they have only up to a 9 channel. Thanks for your help and I will be returning this item to hobby shop.

[MikeCam]

Lots of receiver ready planes out there. Just add a RX and battery and go fly. For that order some of these. http://www.hobbyking.com/hobbyking/s...ompatible.html

Or these. http://www.hobbyking.com/hobbyking/s..._Receiver.html

Have used both with 0 issues so far.