Register Now

12-07-2010, 08:07 PM

IT's HERE ....yaaaaaa hooooo

Worried me a bit as there was a big hole in the box,but everything seems to check out ok.

All parts test fit beauty .

It makes my Eflite 777 look whimpy
I'll post pics as it is, then of course after it gets is Canadian makeover

Mike

Shotgun06 · 12-07-2010, 10:17 PM

Cool! Can't wait to see some pics.

4stripes · 12-08-2010, 06:31 AM

What size are the components (fans/ESC/battery)? Who makes it? Will it have retracts?
Cheers Eric

Guest · 12-08-2010, 09:12 AM

ya mike post some pics...

12-09-2010, 08:20 PM

Here's a quick shot of it

The esc's are 4x 40 amps ,driving 55mm fans ,and i'll be using 4cell 3300-4000mah bats.
the label at the top of the instructions say it's made by Tian Sheng, i purchased it from PW-RC.com

And as for retracts? well it doesn't come with them but i'm sure after a few flights i'll try to figure something out.
The mains are not scale as they are 2x2x2x2 on each side, when the" real deal" is 3x3, so new custom trucks might be in order.

I just might cut the big flaps in though, and see just how slow i can get it to fly

Guest · 12-09-2010, 10:03 PM

looks big ..you might have to keep it at my place

12-09-2010, 10:26 PM

The way the girlfriend acted when she first saw the box .....I thought the c-17 AND ME were going to have to come stay @ your house

Guest · 12-10-2010, 09:31 AM

lol you and your planes are welcome anytime..lol
it doesn't look like were going to get a break from this rain till after xmas,so building i will do.going to put some habu power plant into that f-16,also i have my zero to finish up on and the adrenaline to finish.
im also looking for a 50cc airframe.
i was thinking (weather permiting ) that we do a new years day fly.what do you think?

12-10-2010, 10:23 PM

New years would be cool
The monsoons should subside by then but it might be snow by then too

Here are a few more pics of the LG mounts, the front gear mount/battery access
hatch the mess of wires from the wings and the 4 esc's and numerous wires

There is a good possibility for retracts as there is lots of room under there and inside the a/c , but REALLY just want to get it up and flying first.

12-10-2010, 10:37 PM

A few more.., one main truck,nose,&esc's

12-07-2010, 08:07 PM	#1
mike88 Guest Feedback: / % Posts: n/a Total Props: 0	CC-177 Globemaster 3 Remove this ad - become a site supporter! IT's HERE ....yaaaaaa hooooo Worried me a bit as there was a big hole in the box,but everything seems to check out ok. All parts test fit beauty . It makes my Eflite 777 look whimpy I'll post pics as it is, then of course after it gets is Canadian makeover Mike
	.

12-07-2010, 10:17 PM	#2
Shotgun06 RCC Senior Contributor I am: Alain F Join Date: Oct 2007 Location: Saint-Honoré, Québec Feedback: 2 / 100% Posts: 592 Total Props: 8	Re: CC-177 Globemaster 3 Cool! Can't wait to see some pics. __________________ Disclaimer: Having said that, this is just my personal opinion, I might be wrong, please don't quote me, have a nice day.
	.

12-08-2010, 06:31 AM	#3
4stripes RCC Supreme Contributor I am: Flyboy 1 (Eric K) Join Date: Feb 2007 Location: Earth (zone E) Burlington Radio of choice: CPDLC & Mind Control # of RCs: 777 Feedback: 30 / 100% Posts: 4,457 Total Props: 203	Re: CC-177 Globemaster 3 What size are the components (fans/ESC/battery)? Who makes it? Will it have retracts? Cheers Eric __________________ Zen thinking * It's rebuildable till it fits back in the box. ** Safety First! Egos have no place in the cockpit. RPAS BASIC helpful info…(useful links) https://www.rccanada.ca/rccforum/sho...77&postcount=1
	.

12-08-2010, 09:12 AM	#4
Guest Guest Join Date: Sep 2002 Feedback: 0 / 0% Posts: 0 Total Props: 57	Re: CC-177 Globemaster 3 ya mike post some pics...
	.

12-09-2010, 08:20 PM	#5
mike88 Guest Feedback: / % Posts: n/a Total Props: 0	Re: CC-177 Globemaster 3 Here's a quick shot of it The esc's are 4x 40 amps ,driving 55mm fans ,and i'll be using 4cell 3300-4000mah bats. the label at the top of the instructions say it's made by Tian Sheng, i purchased it from PW-RC.com And as for retracts? well it doesn't come with them but i'm sure after a few flights i'll try to figure something out. The mains are not scale as they are 2x2x2x2 on each side, when the" real deal" is 3x3, so new custom trucks might be in order. I just might cut the big flaps in though, and see just how slow i can get it to fly Attached Thumbnails Last edited by mike88; 12-12-2010 at 11:04 AM.
	.

12-09-2010, 10:03 PM	#6
Guest Guest Join Date: Sep 2002 Feedback: 0 / 0% Posts: 0 Total Props: 57	Re: CC-177 Globemaster 3 looks big ..you might have to keep it at my place
	.

12-09-2010, 10:26 PM	#7
mike88 Guest Feedback: / % Posts: n/a Total Props: 0	Re: CC-177 Globemaster 3 The way the girlfriend acted when she first saw the box .....I thought the c-17 AND ME were going to have to come stay @ your house
	.

12-10-2010, 09:31 AM	#8
Guest Guest Join Date: Sep 2002 Feedback: 0 / 0% Posts: 0 Total Props: 57	Re: CC-177 Globemaster 3 lol you and your planes are welcome anytime..lol it doesn't look like were going to get a break from this rain till after xmas,so building i will do.going to put some habu power plant into that f-16,also i have my zero to finish up on and the adrenaline to finish. im also looking for a 50cc airframe. i was thinking (weather permiting ) that we do a new years day fly.what do you think?
	.

12-10-2010, 10:23 PM	#9
mike88 Guest Feedback: / % Posts: n/a Total Props: 0	Re: CC-177 Globemaster 3 New years would be cool The monsoons should subside by then but it might be snow by then too Here are a few more pics of the LG mounts, the front gear mount/battery access hatch the mess of wires from the wings and the 4 esc's and numerous wires There is a good possibility for retracts as there is lots of room under there and inside the a/c , but REALLY just want to get it up and flying first. Attached Thumbnails
	.

12-10-2010, 10:37 PM	#10
mike88 Guest Feedback: / % Posts: n/a Total Props: 0	Re: CC-177 Globemaster 3 A few more.., one main truck,nose,&esc's Attached Thumbnails
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BK-177 fuse for Blade CP	BCRCflyer	FS - Helicopters & MultiRotors	1	10-03-2006 12:45 AM

vBulletin Message

Cancel Changes

Register Now

Log-in