Register Now

**scaleguy** · 01-28-2007, 03:47 PM

Quote:

Originally Posted by ninelaps

A quick search brings up this company.

http://www.synthanetaylor.com/

Ninelaps,

Good source if they will sell retail they are about 30 minutes from Sammy and about 70 minutes from Joe.

I'll give them a cal on monday moning and see if they have counter sales for cash/cc.

thanx for the link.

Guest · 01-28-2007, 10:12 PM

hey Jim, when you call, see if you can get prices for 1/16" G10 sheet.
This is probably where my G10 came from a couple of years ago.
Joe

**scaleguy** · 01-29-2007, 06:38 PM

OK I called these guys today, http://www.synthanetaylor.com/, and here is the lowdown....

G10, 1/16" thick, 36" x 48" sheet weighs 7.6 lbs., cost is $8.25/lb = $62.70/sheet.

PROBLEM! MINIMUM $250.00 order at a time so you would have to buy 4 sheets.

NEXT!

Bob Hudson · 01-29-2007, 08:42 PM

Sammy....

How big a piece do you need?

Bob

**Concordefan** · 01-30-2007, 09:25 AM

Quote:

Originally Posted by Bob Hudson

Sammy....

How big a piece do you need?

Bob

Hi Bob,

I am thinking to get 1/8" x 12" x 24" sheet, this sheet will be taken to CNC cutter to cut tracks and sliders for the flaps, plus whatever will be sapres i will use it for other areas where ever needed.

http://www.crimpcircuits.com/

I have located another above source in N.York area, they have smaller sizes and there prices are very reasonable too. I will check them out sometime this week.

flyguy74 · 01-30-2007, 01:00 PM

Hey guys

THis is a great place in florida that has carbon fiber!

http://www.robotmarketplace.com/mark...rbonfiber.html

micman · 01-30-2007, 01:11 PM

Hi sammy
www.chiefaircraft.com Have carbon fibre sheets, size is 6x12, thickness is .090 whatever that is. It is 33.95 a sheet US. THese guys are in Oregon, opposite side of the world for you

If you go to the site to check it out click and the radio controlled section, this company also does large aircraft.

Build is looking exellent

Mickey

**Concordefan** · 01-30-2007, 03:59 PM

Ok i just reply email back from Crimpcircuits and they just manufacture PCB but don't sell them...DOHHH

Mickey and Tom thanks guys for the links i will check them out later.

Mic its coming slowly but surely...

JimBrown · 01-30-2007, 05:08 PM

Sammy,

If you can't find a Canadian source, or a better price, try here:

http://www.franktiano.com/scaleproductFrameset.htm

Regards,
...jim

01-29-2007, 06:38 PM	#13
scaleguy IMAC/SA or NOTHING! ★ Site Supporter ★ I am: JimmyD Join Date: Nov 2002 Location: Mississauga On, SE Zone Radio of choice: JETI Duplex DS-24 # of RCs: ? Feedback: 75 / 100% Posts: 16,819 Total Props: 59	OK I called these guys today, http://www.synthanetaylor.com/, and here is the lowdown.... G10, 1/16" thick, 36" x 48" sheet weighs 7.6 lbs., cost is $8.25/lb = $62.70/sheet. PROBLEM! MINIMUM $250.00 order at a time so you would have to buy 4 sheets. NEXT! __________________ Jim Daly #IAmIMAC IMAC Sequence Committee Member MAAC #14323L IMAC #3678 *Windy you ask? I have Whitecaps on my Coffee, YOU be the Judge!*
	.

01-29-2007, 08:42 PM	#14
Bob Hudson RCC Master Contributor I am: Bob H Join Date: Oct 2002 Location: Mississauga, Ontario Feedback: 0 / 0% Posts: 1,162 Total Props: 1	what size do you need Sammy.... How big a piece do you need? Bob __________________ Bob Hudson, MAAC 9709L
	.

01-30-2007, 01:00 PM	#16
flyguy74 Join Date: Nov 2005 Feedback: 0 / 0% Posts: 111 Total Props: 0	check this out.... Carbon fiber. Hey guys THis is a great place in florida that has carbon fiber! http://www.robotmarketplace.com/mark...rbonfiber.html
	.

01-30-2007, 01:11 PM	#17
micman Join Date: Oct 2006 Feedback: 0 / 0% Posts: 112 Total Props: 0	carbon fibre Hi sammy www.chiefaircraft.com Have carbon fibre sheets, size is 6x12, thickness is .090 whatever that is. It is 33.95 a sheet US. THese guys are in Oregon, opposite side of the world for you If you go to the site to check it out click and the radio controlled section, this company also does large aircraft. Build is looking exellent Mickey
	.

01-30-2007, 03:59 PM	#18
Concordefan Level 3 Supporter ★ Site Supporter ★ I am: Robert Join Date: Apr 2005 Location: Toronto, Ontario Radio of choice: Spektrum # of RCs: 2 Feedback: 0 / 0% Posts: 3,073 Total Props: 0	Ok i just reply email back from Crimpcircuits and they just manufacture PCB but don't sell them...DOHHH Mickey and Tom thanks guys for the links i will check them out later. Mic its coming slowly but surely... __________________ Do sign the petiton. www.canadiansuperconnie.org We could Save our Connie CF-TGE, We still have chance, Once gone we will lose our History and Heritage forever....
	.

01-28-2007, 10:12 PM	#12
Guest Guest Join Date: Sep 2002 Feedback: 0 / 0% Posts: 0 Total Props: 57	hey Jim, when you call, see if you can get prices for 1/16" G10 sheet. This is probably where my G10 came from a couple of years ago. Joe
	.

01-30-2007, 05:08 PM	#19
JimBrown RCC Supreme Contributor I am: Jim Brown Join Date: Mar 2003 Location: Rockland, Ont. Radio of choice: Jeti DS-24 # of RCs: 10 Feedback: 22 / 100% Posts: 2,040 Total Props: 4	Sammy, If you can't find a Canadian source, or a better price, try here: http://www.franktiano.com/scaleproductFrameset.htm Regards, ...jim __________________ Radio Control Aircraft Gallery Website Radio Control Aircraft Gallery Facebook Page
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

vBulletin Message

Cancel Changes

Register Now

Log-in