Register Now

imported_Varv · 03-02-2007, 06:08 PM

I put my txt back to stock for the winter, in crawler form shes abit to slow to have any amount of fun in the powder. I relized that 3 of the 4 axle mounts were broke.. and the last one was cracked so I figured I'd make some one off ones to 'beef' it up abit. So sence I didn't feel like working on other stuff last week I came up with these.

I don't know why the pic came out that bad but I'm not taking them off to take another lol.

I'm almost done making a set of 23m hex adapters for it to run the beadlocks on it properly. until then the tweaked stockers work good in the snow.

speedygonzales · 03-02-2007, 06:20 PM

what mill are you running.

im planning on getting a cnc mill. and a lathe.

imported_Varv · 03-02-2007, 10:00 PM

They were done on a First mill, cant remember the size / hp etc on it. I'd love to have a cnc mill, got no where to put it though haha.

speedygonzales · 03-02-2007, 10:28 PM

have a pic of it? you did a hell of a good job!

mytruckluvesgas · 03-02-2007, 10:38 PM

There was nothing wrong with the pics. I can tell you did a killer job on those.

speedygonzales · 03-02-2007, 10:41 PM

Quote:

Originally Posted by mytruckluvesgas

There was nothing wrong with the pics. I can tell you did a killer job on those.

nononono

pic of the mill. i see his work and its awsome.

imported_paulrich · 03-03-2007, 11:23 PM

Awesome work !

imported_mirage · 03-05-2007, 04:17 AM

Nice job Chris, reminds me when i took cnc machining and cad desing in college, like 3 million years ago! LOL!

imported_Varv · 03-06-2007, 07:55 PM

Sorry no pic's of the mill
Free hand Michel lol we only have one cnc machine in our shop right now and it seems like theres always someone on it, this fall I'll get into the crazy stuff with the cnc.
Once march break is done I should have some pic's of the adapters i'm making. Going to use the cnc mill for the internal hex's. should be fun.

03-02-2007, 06:08 PM	#1
imported_Varv RCC Junior Contributor Join Date: Sep 2004 Feedback: 0 / 0% Posts: 216 Total Props: 0	What to do when your board with a mill.... Remove this ad - become a site supporter! I put my txt back to stock for the winter, in crawler form shes abit to slow to have any amount of fun in the powder. I relized that 3 of the 4 axle mounts were broke.. and the last one was cracked so I figured I'd make some one off ones to 'beef' it up abit. So sence I didn't feel like working on other stuff last week I came up with these. I don't know why the pic came out that bad but I'm not taking them off to take another lol. I'm almost done making a set of 23m hex adapters for it to run the beadlocks on it properly. until then the tweaked stockers work good in the snow. __________________ That thing must move!, cause you were Haulin' A55 When I Passed You!!
	.

03-02-2007, 06:20 PM	#2
speedygonzales RCC Expert Contributor Join Date: Jan 2005 Feedback: 0 / 0% Posts: 962 Total Props: 0	what mill are you running. im planning on getting a cnc mill. and a lathe. __________________ what's nitro HPI BAJA 5B THE DEMON SEED RAM-TECH REAR LOWER ARMS RAM-TECH REAR UPPER ARMS RAM-TECH FRONT SHOCK TOWER TEAM GO NADS X CAN TEAM GO NADS REDNECK rc18t with mamba (blinged?)
	.

03-02-2007, 10:00 PM	#3
imported_Varv RCC Junior Contributor Join Date: Sep 2004 Feedback: 0 / 0% Posts: 216 Total Props: 0	They were done on a First mill, cant remember the size / hp etc on it. I'd love to have a cnc mill, got no where to put it though haha. __________________ That thing must move!, cause you were Haulin' A55 When I Passed You!!
	.

03-02-2007, 10:28 PM	#4
speedygonzales RCC Expert Contributor Join Date: Jan 2005 Feedback: 0 / 0% Posts: 962 Total Props: 0	have a pic of it? you did a hell of a good job! __________________ what's nitro HPI BAJA 5B THE DEMON SEED RAM-TECH REAR LOWER ARMS RAM-TECH REAR UPPER ARMS RAM-TECH FRONT SHOCK TOWER TEAM GO NADS X CAN TEAM GO NADS REDNECK rc18t with mamba (blinged?)
	.

03-02-2007, 10:38 PM	#5
mytruckluvesgas RCC Contributor Join Date: Feb 2007 Feedback: 0 / 0% Posts: 365 Total Props: 0	There was nothing wrong with the pics. I can tell you did a killer job on those. __________________ Losi 8ight-T2.0 \| Losi 8ight-B \| Associated TC5 \| Losi Micro T www.DurhamRC.com Team Fat Racing
	.

03-03-2007, 11:23 PM	#7
imported_paulrich Join Date: Apr 2006 Feedback: 0 / 0% Posts: 89 Total Props: 0	Awesome work !
	.

03-05-2007, 04:17 AM	#8
imported_mirage RCC Senior Contributor I am: Michel L Join Date: Sep 2004 Location: Moncton nb Feedback: 0 / 0% Posts: 646 Total Props: 0	Nice job Chris, reminds me when i took cnc machining and cad desing in college, like 3 million years ago! LOL! __________________ Don`t sweath the petty things and don`t pet the sweathy things...
	.

03-06-2007, 07:55 PM	#9
imported_Varv RCC Junior Contributor Join Date: Sep 2004 Feedback: 0 / 0% Posts: 216 Total Props: 0	Sorry no pic's of the mill Free hand Michel lol we only have one cnc machine in our shop right now and it seems like theres always someone on it, this fall I'll get into the crazy stuff with the cnc. Once march break is done I should have some pic's of the adapters i'm making. Going to use the cnc mill for the internal hex's. should be fun. __________________ That thing must move!, cause you were Haulin' A55 When I Passed You!!
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

vBulletin Message

Cancel Changes

Register Now

Log-in