Register Now

vett · 06-13-2005, 06:44 PM

Hi, I just purchased what I think is a great deal, a nib eco 8 with many upgrades and a jeti phasor 30-3 brushless motor. I don't know much about these motors. What dose 30-3 mean ? also can I use any brushless controler or do I have to use one from jeti ? ALso anything else that would help. I am not new to the hobby been building for more years than I want to admit but the brushless thing is new to me.
Thanks for any help

rscamp · 06-13-2005, 08:40 PM

I'm not intimately familiar with the heli or motor but I would imagine the 30 is diameter in mm and the 3 is for a 3-turn winding.

You can use several controllers.

Joe Bajkor has a heli like this and would be the best guy to answer questions on this config.

Rob

jeffd · 06-15-2005, 07:11 AM

Actually, the 30 in 30-3 refers to the length of the magnets in the motor. There is also a 45-3 with is a longer version of the same motor.

vett · 06-15-2005, 05:10 PM

can I use any brand brushless controler ?

06-13-2005, 06:44 PM	#1
vett RCC Junior Contributor I am: fred P. Join Date: Mar 2005 Location: New York, USA Feedback: 0 / 0% Posts: 135 Total Props: 0	electric heli help Remove this ad - become a site supporter! Hi, I just purchased what I think is a great deal, a nib eco 8 with many upgrades and a jeti phasor 30-3 brushless motor. I don't know much about these motors. What dose 30-3 mean ? also can I use any brushless controler or do I have to use one from jeti ? ALso anything else that would help. I am not new to the hobby been building for more years than I want to admit but the brushless thing is new to me. Thanks for any help
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-13-2005, 08:40 PM	#2
rscamp RCC Expert Contributor I am: Rob C Join Date: Dec 2002 Location: Dundas, ON Feedback: 1 / 100% Posts: 864 Total Props: 0	I'm not intimately familiar with the heli or motor but I would imagine the 30 is diameter in mm and the 3 is for a 3-turn winding. You can use several controllers. Joe Bajkor has a heli like this and would be the best guy to answer questions on this config. Rob
	.

06-15-2005, 07:11 AM	#3
jeffd RCC Noob I am: Jeff D Join Date: Jun 2005 Location: Ottawa Feedback: 1 / 100% Posts: 18 Total Props: 0	Actually, the 30 in 30-3 refers to the length of the magnets in the motor. There is also a 45-3 with is a longer version of the same motor.
	.

06-15-2005, 05:10 PM	#4
vett RCC Junior Contributor I am: fred P. Join Date: Mar 2005 Location: New York, USA Feedback: 0 / 0% Posts: 135 Total Props: 0	can I use any brand brushless controler ?
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in