[Lazy Ace]

If you have the numbers you can do the cross ref yourself.

Dennis

[wollins]

Originally Posted by hitechflyer

This would work fine and no concerns of compromising the strength of the prop.

Originally Posted by hitechflyer

Is your prop too thick? If so I would counter bore the prop, would need a nut with one end turned down like a sleeve to fit in the counter bore.

Aha! Now I understand what you're suggesting. That might just work ... never seen a nut like that ... where can one find such a nut?

Colin

[Max]

My enya has the same type of stepped nut on it, the thread extends down into the prop hub to accomodate the thicker hubbed props. All it means is you bore the hole in the prop hub a little thicker than the bolt, and the stepped nut centers the prop.


Look here and see if there is a stepped nut that matches the thread you have on your prop-adapter:
https://www.hobbyzone.com/tru-turn/

[Lazy Ace]

Still should be using a compression washer to grip that prop.

Dennis

[Max]

Originally Posted by Lazy Ace

Still should be using a compression washer to grip that prop.

Dennis

Of course! That goes without saying

....Just saying