[NITRIS]

thanks guys for the help

[bcsaltchucker]

Originally Posted by dashpuppy

sounds like a good shopping list

I just put it out there as an option. Not a high end setup, as it is from Hobbyking of course. But also not the real crappy stuff you see out there either. I understand have to be wary of the very large high voltage turnigy motors for having magnets separate, but the G46 on 4S is not high volts, so there you go. I am putting Turnigy6S system on a 1/5 scale cub soon. At worst I might have a deadstick Also, my flying buddies find the Turnigy as less efficient than the Eflite motors, at least comparing Park480 to Park480 motors.