Register Now

Flyin High · 04-09-2007, 02:02 PM

Trying to decide what engine to put in my Carl Goldberg 77" Yak. Havent heard much on these engines personally. Have any of you had expierience or heard anything on them.

Thanks!

Sonic Boomer · 04-09-2007, 07:27 PM

Have you checked out the engines available from Paragon RC Models - www/prcmodel.com - their 45cc unit would probably work in the Yak. I am going to use a 42cc poulan conversion in my 77" Sig Sukhoi 31 which would be a similar combination. Substantial cost saving over either the Evo or Brison - and you even get a muffler. Oh, and in all honesty, I have not tried one of these engines yet, this is just another option.

Richie. H. · 04-10-2007, 03:56 PM

I have a Brison 2.4 in a Midwest Extra, 14lbs pulls it good. Plus Brison motors can be ordered from the factory here in Canada. Less shipping fees. Mine has been good.

http://www.rc-revolution.com/

So I vote Brison

Richie. H. · 04-10-2007, 04:05 PM

OK, I just looked at the Paragon sight, thats in Canada too. The motor looks like a piston port design, good price!

Don't know anything about them, however the Yak looks good!

*SpaceCowboy* · 04-12-2007, 01:13 AM

How about checking out the Revolution 50 made in Canada

:

2thelmt · 06-18-2007, 07:53 AM

Hi,
We have your Brison or Revolution Engines for sale here. WWW.UniqueRCImports.com

Made and Supported here in Canada! Eh

Come check us out!

Ian D'Orazio

04-09-2007, 02:02 PM	#1
Flyin High RCC Senior Contributor I am: Bob S Join Date: May 2004 Location: Beeton, Ontario Feedback: 4 / 100% Posts: 592 Total Props: 0	Brison 2.4 (39cc) or Evolution 35GT? Trying to decide what engine to put in my Carl Goldberg 77" Yak. Havent heard much on these engines personally. Have any of you had expierience or heard anything on them. Thanks! __________________ -Bob
	.

04-09-2007, 07:27 PM	#2
Sonic Boomer Guest Join Date: Aug 2005 Feedback: 0 / 0% Posts: 303 Total Props: 0	Re: gas engines Have you checked out the engines available from Paragon RC Models - www/prcmodel.com - their 45cc unit would probably work in the Yak. I am going to use a 42cc poulan conversion in my 77" Sig Sukhoi 31 which would be a similar combination. Substantial cost saving over either the Evo or Brison - and you even get a muffler. Oh, and in all honesty, I have not tried one of these engines yet, this is just another option.
	.

04-12-2007, 01:13 AM	#5
SpaceCowboy ~~BANNED PEOPLE~~ I am: Mike B. Join Date: Nov 2002 Location: Brentwood , Ontario Radio of choice: FAVOURITE - JR X9303 # of RCs: 7 Feedback: 2 / 100% Posts: 1,517 Total Props: 2	Revolution 50 How about checking out the Revolution 50 made in Canada :
	.

06-18-2007, 07:53 AM	#6
2thelmt RCC Senior Contributor I am: ID Join Date: Aug 2003 Location: Acton ON Canada Feedback: 0 / 0% Posts: 611 Total Props: 0	Hi, We have your Brison or Revolution Engines for sale here. WWW.UniqueRCImports.com Made and Supported here in Canada! Eh Come check us out! Ian D'Orazio __________________ "The only way of discovering the limits of the possible is to venture a little way past them … into the impossible." - Arthur C. Clarke
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-10-2007, 03:56 PM	#3
Richie. H. Guest Join Date: Dec 2004 Feedback: 0 / 0% Posts: 34 Total Props: 0	I have a Brison 2.4 in a Midwest Extra, 14lbs pulls it good. Plus Brison motors can be ordered from the factory here in Canada. Less shipping fees. Mine has been good. http://www.rc-revolution.com/ So I vote Brison
	.

04-10-2007, 04:05 PM	#4
Richie. H. Guest Join Date: Dec 2004 Feedback: 0 / 0% Posts: 34 Total Props: 0	OK, I just looked at the Paragon sight, thats in Canada too. The motor looks like a piston port design, good price! Don't know anything about them, however the Yak looks good!
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in