Register Now

aubej · 05-31-2006, 04:23 PM

Anyone have leftover landing gear from an e-flight mini-edge?

I busted mine last night and thought I would check here before ordering a new set at 20 bones...ouch!

Jason

InvertedMike · 06-01-2006, 08:12 AM

Mine has developed some small cracks and play from many landings. I strengthened the fibreglass gear with some thin ca. You can try that also for now depending on the extent of the damage.

Mike

ronm · 06-01-2006, 09:46 AM

I'm just about finished assembling mine.
How do you guys like yours?
What are you using for power?
Is there anything to watch out for (other than weak landing gear)?

aubej · 06-01-2006, 09:57 AM

Hi Ron,

I love the little thing. I power mine with an AXI 2808/24, CC25 ESC and TP 2100 3 cell pack.

It's a rocket. I am amazed at how well it flys.

I figured out blenders on Monday night and couldn't believe how well the little Edge does them. What a blast.

On a side note, the MAXAIR Mini Electric Velox RII (38") is in final prototype stages. Hope to have it out soon.

Jason

05-31-2006, 04:23 PM	#1
aubej RCC Supreme Contributor I am: Jason A. Join Date: Jul 2002 Location: Moncton, NB Feedback: 27 / 100% Posts: 2,725 Total Props: 5	Mini Edge Landing gear Remove this ad - become a site supporter! Anyone have leftover landing gear from an e-flight mini-edge? I busted mine last night and thought I would check here before ordering a new set at 20 bones...ouch! Jason
	.

06-01-2006, 08:12 AM	#2
InvertedMike RCC Junior Contributor I am: Michael K Join Date: Aug 2004 Location: Toronto Radio of choice: DX8 # of RCs: 12 Feedback: 1 / 100% Posts: 231 Total Props: 0	Mine has developed some small cracks and play from many landings. I strengthened the fibreglass gear with some thin ca. You can try that also for now depending on the extent of the damage. Mike __________________ If it has wings, rotors or two wheels, I'm interested!
	.

06-01-2006, 09:46 AM	#3
ronm RCC Supreme Contributor I am: Ronm Join Date: Dec 2002 Location: Mission, B.C. Radio of choice: Futaba # of RCs: 10 Feedback: 0 / 0% Posts: 5,625 Total Props: 0	I'm just about finished assembling mine. How do you guys like yours? What are you using for power? Is there anything to watch out for (other than weak landing gear)? __________________ Ron Mattiuz Flying Tigers RC Club "Flying an airplane is just like riding a bike...except it's harder to put cards in the spokes"
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-01-2006, 09:57 AM	#4
aubej RCC Supreme Contributor I am: Jason A. Join Date: Jul 2002 Location: Moncton, NB Feedback: 27 / 100% Posts: 2,725 Total Props: 5	Hi Ron, I love the little thing. I power mine with an AXI 2808/24, CC25 ESC and TP 2100 3 cell pack. It's a rocket. I am amazed at how well it flys. I figured out blenders on Monday night and couldn't believe how well the little Edge does them. What a blast. On a side note, the MAXAIR Mini Electric Velox RII (38") is in final prototype stages. Hope to have it out soon. Jason
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in