Register Now

Bigrig21 · 05-29-2005, 01:26 AM

I finaly got my T-Maxx in and having a blast with it but i noticed that the right rear of my truck were the exaust comes out is getting extra dirty is this a sighn that your running to rich? also after i run for awhile it starts to stall a fair amount don't know what to do about that either. other than that all is good

wedginator · 05-29-2005, 08:06 AM

Getting dirty on that side doesn't mean you're running too rich. The exhaust will always shoot some oil out even if it's lean and oil attracts dirt. As for your stalling, you gotta give more info because as you described it, it can mean many things.

imported_ICSAM · 05-31-2005, 10:14 PM

You may be leaning out at 1/2 tank - common on the maxx series trucks. I recommend going with the OFNA 9.5 fuel tank conversion. PM me for more info on this easy yet effective mod.

ayk_driver · 06-01-2005, 10:44 AM

ya the truck leans out at 1/2 tank... i usually run mine a bit rich so when 1/2 tank comes its armed upa nd it worn get hot

Bigrig21 · 06-01-2005, 03:04 PM

what do i adjust to make it come down to idle faster mine when i let off it idles high for about 10sec then comes down, sometimes wants to lerch ahead

05-29-2005, 01:26 AM	#1
Bigrig21 Join Date: May 2005 Feedback: 0 / 0% Posts: 12 Total Props: 0	to rich? Remove this ad - become a site supporter! I finaly got my T-Maxx in and having a blast with it but i noticed that the right rear of my truck were the exaust comes out is getting extra dirty is this a sighn that your running to rich? also after i run for awhile it starts to stall a fair amount don't know what to do about that either. other than that all is good
	.

05-29-2005, 08:06 AM	#2
wedginator RCC Senior Contributor Join Date: Mar 2005 Feedback: 0 / 0% Posts: 616 Total Props: 0	Getting dirty on that side doesn't mean you're running too rich. The exhaust will always shoot some oil out even if it's lean and oil attracts dirt. As for your stalling, you gotta give more info because as you described it, it can mean many things. __________________ Wedginator
	.

06-01-2005, 10:44 AM	#4
ayk_driver RCC Supreme Contributor I am: Andrew C Join Date: May 2004 Location: Barrie, Ontario Radio of choice: Old School FM... Futaba mainly # of RCs: 5+ Feedback: 0 / 0% Posts: 2,956 Total Props: 0	ya the truck leans out at 1/2 tank... i usually run mine a bit rich so when 1/2 tank comes its armed upa nd it worn get hot __________________ Old Beater Sable
	.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-31-2005, 10:14 PM	#3
imported_ICSAM RCC Master Contributor Join Date: May 2005 Feedback: 0 / 0% Posts: 1,135 Total Props: 0	You may be leaning out at 1/2 tank - common on the maxx series trucks. I recommend going with the OFNA 9.5 fuel tank conversion. PM me for more info on this easy yet effective mod.
	.

06-01-2005, 03:04 PM	#5
Bigrig21 Join Date: May 2005 Feedback: 0 / 0% Posts: 12 Total Props: 0	what do i adjust to make it come down to idle faster mine when i let off it idles high for about 10sec then comes down, sometimes wants to lerch ahead
	.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

vBulletin Message

Cancel Changes

Register Now

Log-in