|01-04-2011, 05:14 PM||#1|
RCC Senior Contributor
I am: Ron 2729
Join Date: Nov 2009
Location: Alliston, Ontario
Radio of choice:
JR X9303, JR 10X
# of RCs: 12
Feedback: 52 / 100%
Total Props: 0
NIB G103 Head Lock Gyro
Remove this ad - become a site supporter!
1. Input signal: 1.0-2.0ms
2. Input power: 4.6-6.0V
3. Weight: 12.5g
3. Size: 27*28.5*18
1. Used for Electric helicopter;
2. Dual sensibility adjusting model;
3. With a built in tenperature equalizing electrocircuit
4. Used for 3D aerobatic acts
REV/NOR Normal/Reverse Switch
LED Status indicator
Delay Gain adjustment
Limit Servo range control
I: Delay Gyro Gain adjustment
1. increase the adility of gyro to balance the helicopter (stable but less active),
2. decrease the ability of gyro to balance the helicopter (active but less stable).
When adjusting the gain of gyro, the gain is differs when applied with different servos or
different helicopters Generally speaking ,the faster the tail servo responds the gyro’s gain
will increase .The faster the helicopter main rotors rotate, the tail servo’s responds will be
stronger, therefore the gain of gyro should be reduced.
II: REV/NOR Normal and Reverse Switch
REV Switch: reversing switch for gyro Adjust the tail servo’s direction.
REV: reverse NOR: Normal motion
When checking the action direction of Gyro ,lift up the helicopter and let the head of the
helicopter turn left ,if the direction of the tail servo turns is in accordance with the transmitter’s
stick turns, it indicates that initialization setting is right .Otherwise you should switch the
Normal and Reverse Switch of gyro.
Please double check to make sure that the action direction of the gyro is correct.
III: Limit Servo range control
Limit :Adjust the maximal range of tail servo.
A .when increase the range of tail servo will increase.
B .when decrease the range of tail servo will decrease.
Attention: Adjust the knob to limit the tail servo range within the maximal displacement range of the tail pitch sliding bush when the rocker of the tail servo being moved to both left and right fully ,by doing this .
The range of tail servo won’t exceed the limitation so as to protect the servo and the link lever when flying .On the other hand ,don’t adjust the servo’s range too start to reduce the gyro’s performance.
IV: LED Status indicator
Display status Status of gyro
Fast Flashing After powering on, the gyro is initializing
constant light The gyro is locked
Extinguishing Power off or the gyro is unlocked
Slow flashing Gyro can not receive the tail servo control signal .The tail servo can’t work
Intermittent flashing Ch5 isn’t connected well, or it moved to the middle during animalizing,
Remove the battery and connect again.
Asking $15.00 including shipping
I take PayPal or EMT
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
Last edited by repeter_246; 01-04-2011 at 05:26 PM.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|
|Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale: NIB Align RCE-550 Head Lock Gyro||Cat 1||FS - Electronics||0||11-01-2010 08:27 PM|
|New ALIGN GP780 Head Lock Gyro||RCcanuck||FS - Electric Gear||0||10-15-2010 11:34 PM|
|PG-800 head lock gyro||Alex29||FS - Helicopters & MultiRotors||0||08-22-2010 04:42 PM|
|Align GP750 Head Lock Gyro - 10 flights only||Evgeny||FS - Electronics||1||12-23-2009 09:04 AM|
|Brand ne wtelebee head lock gyro||hs748||FS - Electronics||0||07-02-2008 08:48 AM|