Hardcore Racing has just put out a load of hopups
And some must haves...apparently these have been released by team Losi..but if you looking for information on anything I'd forget about contacting losi they never respond to emails..but fortunately there are a number of suppliers of this stuff out there
I think this is an essential upgrade for the lst.
Team Losi is now offering a secondary gear cover for your LST to help keep small rocks and gravel out of your gears. The LOSB3191 Secondary Gear Cover Set allows you to really seal up the two-speed gears on the side of the chassis. This inexpensive cover set includes several precut vinyl covers for the chassis and a molded clear Lexan inner cover that attaches to the stock unit. When installed, the two-speed gears are almost completely enclosed making it extremely difficult for gravel or debris to get into them. The slipper adjustment is not effected in any way. If you run in extremely harsh conditions don’t risk wearing out your gears prematurely.
LOSB3191 Secondary Gear Cover Set (LST) $5.50
Now you can further personalize your Losi Super Truck with anodized shock bodies and caps from Team Losi. The precision-machined shock bodies feature ball-milled flutes for a real hi-tech look. The bodies and caps are then polished and color anodized. These shock bodies and caps are direct replacements for the standard shocks used on the LST and use all the standard hardware. In addition to being available in single pieces they are also offered in a set of four.
LOSB2803 Shock Body – Red (LST) $11.99
LOSB2804 Shock Cap – Red (LST) $8.00
LOSB2805 Shock Body – Gold (LST) $11.99
LOSB2806 Shock Cap – Gold (LST) $8.00
LOSB2807 Shock Body & Cap Set (4) – Red $68.99
LOSB2808 Shock Body & Cap Set (4) – Red $68.99
Hard-anodized, threaded shock bodies
LST shock springs
Team Losi now offers a range of suspension springs for serious LST racers. The coil springs used on the coil-over shocks are one of the most important parts of the suspension package on any vehicle. These new springs offer both higher rate and lower rate springs. These springs are precision wound with closed ends from Mil Spec spring wire. The ends are then ground flat for proper seating and they go through secondary heat-treating to eliminate unwanted stress. Each spring is powder coated for easy identification. The LOSB2949 (White) spring set is a 4.0 lb. rate, which is one step softer than the stock 5.0 rate springs. The LOSB2951 (Black) spring set is a 6.0 lb. rate and the LOSB2952 (Yellow) spring set is a 7.4 lb. rate for two stiffer options. All springs are sold in pairs.
LOSB2949 Shock Springs – White 4.0 lb. Rate (2) (LST) $6.50
LOSB2951 Shock Springs – Black 6.0 lb. Rate (2) (LST) $6.50
LOSB2952 Shock Springs – Yellow 7.4 lb. Rate (2) (LST) $6.50
Prices in U.S Dollars from http://www.maxxtraxxusa.com/