|05-10-2005, 02:57 PM||#1|
RCC Pro Contributor
I am: Muckey M
Join Date: Feb 2005
Location: disneyland Ontario
Feedback: 0 / 0%
Total Props: 0
New XRAY XB8 Parts
Remove this ad - become a site supporter!
Important Notice !!
Please note that none of the below listed new option parts are NOT available yet. All of these option parts are coming soon.
Adjustable Alu Rear Hub Carrier
#353355 Adjustable Alu Rear Hub Carrier - Right
#353365 Adjustable Alu Rear Hub Carrier - Left
New innovation and new XRAY patent – the XRAY Adjustable Rear Hub. CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong rear upright provides very long life and durability in even the most extreme racing conditions.
The rear upright features composite bushings which have the hole positioned off-center, which can be inserted in the bottom of the block where the hinge pin is mounted. A set of four different bushings is available, each with a different eccentric hole position.
By adjusting the bushings, the rear upright can be adjusted for height (up or down) and also for track width (in and out). One of the bushings has the 2° hole which enables outboard toe-in adjustment.
It’s easy, it’s smart, it’s XRAY.
Alu Steering Block
#352255 Alu Steering Block - Right
#352265 Alu Steering Block - Left
Right and left steering block CNC-machined from premium lightweight T6 aluminum, polished for luxuriuous and stylish appearance. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions.
Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks.
#352331 Alu Front Upper Arm Holder - 7075 T6 (5mm)
Front upper suspension holder for REAR of front bulkhead. CNC-machined from highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging.
#352571 Alu “3D” Steering Plate 7075 T6 (6mm)
CNC-machined steering plate from 6mm highest-grade 7075 T6 Swiss aluminum. XRAY stylish black finish with silver edging. This optional “3D” steering plate has various steering linkage mounting positions for optimal bump steer adjustment (adjustment of front toe change during suspension movement). There are three different Ackermann settings possible. The steering plate is mounted with the upper level facing upwards as shown.
#354121 Steel Brake Pad – Laser Cut - Hardened (4)
High-precision, ultra-efficient steel brake pads are one of the best in the market! The steel brake pads are laser cut and afterwards precisely ground on both sides for an ultra-smooth surface finish that guarantees maximum braking efficiency. This set of exclusive brake pads is additionally hardened to increase the life and provide higher stiffness. A must have for serious racers. Set of 4.
Center Diff Spur Gear
#355051 Center Diff Spur Gear 45T
#355052 Center Diff Spur Gear 44T
New optional 44T and 45T large external spur gear for center differential.
Precision machined on a special gear machine.
CVD Drive Shaft – Hudy Spring Steel™
#355209 - Front / Rear
#355409 - Central Front
#355609 - Central Rear
CVD drive shaft made from world-renown HUDY Spring Steel™. The world's lightest and most exclusive 1/8 off-road drive train guarantees reduced rotating weight and increased performance.
The drive shaft parts are ultra lightweight, strategically weight-reduced without compromising strength, and are manufactured from the premium high-quality top-secret Hudy Spring Steel™. The CVD drive shaft is rebuildable and all parts are available separately as spare parts.
#355251 Alu Wheel Axle Offset “+1mm” – Hard Coated
Hardcoated aluminum wheel axle with +1mm offset. Using these wheel axles will increase the overall track width by 2mm, making the car more stable and easier to drive. Set of 2. Wheel axles can be mounted both in front and rear.
#358012 Composite Set of Shims for Shocks 0.7 & 1.3 mm
Set of new composite shims for off-road shocks. The new shims have sharp edges so they hold in the shock body more precisely and firmly. The set includes a thick and thin shim. The thick shim is mounted under the G-clip to hold it more firmly.
The set includes a thick and thin shim. The thick shim is mounted under the G-clip to hold it more firmly.
#358515 Clutch Bell 15T
15-tooth clutch bell made from HUDY steel. Precision machined on a special gear machine.
#358561 Alu Clutch Shoes - CNC Machined - Light 1.71g (3)
These new 1.71g clutch shoes are slightly lighter than the stock aluminum shoes, allowing the engine to spool up a bit more before the shoes grab the flywheel. The end result is a clutch that will engage later in the powerband giving more rip out of the corners.
XRAY’s state-of-the-art engineering and perfectionism is evident in the attention to detail in this and all of its products. Do not compromise on quality and performance; use original and authentic XRAY products.
Yannick Aigoin has won the first round of the French National Championship with his XRAY XB8.
Here is the link.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|