|01-02-2007, 06:33 PM||#1|
RCC Supreme Contributor
For Sale - RC18T - RTR or ARTR
Remove this ad - become a site supporter!
Up for sale is my RC18T.
Pics are 1 year old, when the body was freshly skinned. The body is in the process of being reskinned as we speak, and should be very close in appearance.
Includes the following:
RC18T Team Kit, MINUS THE ORIGINAL TRANSMITTER, MOTOR, ESC AND STEERING SERVO
Mamba 6800 with controller
G&P 8.4 volt, 1100 mah NiMh w. full sized deans connector - last charge at 1084 mah
MIP front CVD's installed
Team Associated blue drive cup covers
Gold and Blue spring set (gold installed)
Blue aluminum heatsink for motor
Integy aluminum steering modifyed for HEAVILY increased steering angle
Hitec HS56HB steering servo
RPM black front bumper - the one that NEVER breaks
Bowties mounted on white Wabash rims - 95% tread left
Roadrage mounted on white dish - 90% tread left
Losi Sport on yello dish rims - 70% tread left (not sure if SPORT is the model of the tire) - these suckers have ultra-grip on the carpet at Big Boy's track.
Losi foam on yellow dish rims - 95% foam left - very minor chunking on sidewall
Set of 4 Thundertiger shocks/springs - need rebuild
Chassis - new
Upper deck - new
Original front bumper - new
Rear carriers - used
Front steering blocks X 2 - new
Suspension arms X 2 - new
8X12X3 bearings X 2 - new
4X8X3 bearings X 2 - new
MIP CVD rebuild kit - new
Diff and input gear - new
Pair of diff halves/drive cups - new
Diff plates X 6 - used one side only (reversable)
Complete used diff assembly
Diff rebuild kit - new
Set of ball ends - new
Original servo mount
Several servo saver parts - new and used
Many servo horns - new
55 tooth spur - used
60 tooth spur X 2 - used
55 tooth gear cover for bottom of chassis
10, 11 X 2, 12, 13, 14, 17, 18 tooth pinions, all in perfect shape
Gear set for the HS56HB servo X 5 (yes thats FIVE)
Spare burned out HS56HB servo - send it in and try your luck
Several axle pins and shims
TONS of spare fasteners and some body clips
steele turnbuckle set, 2 pieces installed on truck
lots of leftover shock bits from rebuilds. some useful, some not.
Included are the two cases that the spare parts and fastenrs fit into, as well as the original box.
Heres a recent video if it kicking some Vendetta-butt!
Notice the very sharp steering after the mod.
The mamba was geared down to go as slow as it could - 60 tooth spur and a 10 tooth pinion with a G&P 7.2 volt, 1100 mah NiMh.
When the 8.4 volt battery is installed with the 55 tooth spur and the 18 tooth pinion, this 18T will consistantly pass at 74 Kph on pavement, as measured with a Bushnell baseball radar gun. Try your luck with lipo - I'd bet close to 90 with a 3 cell.
Price ARTR ** DROPPED ** $250.00
Please keep in mind that the Mamba ALONE was $179.00 plus taxes when I bought it.
Also available is Spektrum DX3 transmitter and receiver that ahs been repainted black. The transmitter itself has very low mileage, but I couldn't STAND the color and had to repaint it. The receiver has been used much more.
Price RTR ** DROPPED ** $350.00
|01-05-2007, 11:54 AM||#3|
Join Date: Jan 2006
Total Props: 0
for the artr what is needed to get it running?
HPI Hellfire (stock)
Mamba 8000 RC18T Factory Team :GRIN:
Pimped out Savage OS 30vg
Caution Big Boy Playing With Big Toys Up Ahead
|01-05-2007, 11:59 AM||#4|
RCC Supreme Contributor
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|