|02-11-2008, 02:50 PM||#1|
RCC Junior Contributor
Join Date: Sep 2007
Feedback: 0 / 0%
Total Props: 0
MT2 G3.0 with a OS 18 cvr
Remove this ad - become a site supporter!
what i have is a used HPI MT2 g3.It has a OS 18 CVR pull start motor with all HPI electronics and radio. Its RTR with manual
It is used but pro tuned. This baby screams. I changed the rims and put HPI chrome rims with dirt racing pro line tires like new tires. The chrome rims are nice but are peeling just a tiny bit on outside edge.
The MT has about 8 tanks on motor, scratches on bottom of chassis. And little dings on bottom here and there. But that’s normal from running
Top side its very clean ,also has a tuned aluminum racing pipe. I also believe the clutch was changed to a racing clutch but not sure.
I got it this way. Only thing that someone did was painted the front turn buckles and shocks and front bumper red. To try and match the rest of truck
They painted the rims too, so i changed them to the chrome ones ..Don’t know what they were thinking. But it is what it is. IT runs great , will start right up and fly
This baby is so fast i spun the foam out of the old tires ..it shot the insert foam out of the tire about 6 feet up ..LOL.. but now i put these nice HPI chromes ..looks great
The other thing was they broke the tip off the battery cover lid. So usually you would have to slide cover on and slide a clip in it to hold it. But that little nub is gone ..
So I used a little bolt and just screw it in , no big deal , but I am honest and it seals fine , to much of a hassle to remove and put a little nub for a clip. The bolt works great
Other than that , it just has scratched up underside. But very clean top side. Its RTR..
price is 200
here is the link to some pics
Horsepower is how fast you hit the wall , Torque is how far the wall moved after you hit it
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|