[josh hyper7]

Anyone have any tips or tricks for a bone stock slash ????

[GRAVEDIGGER#28]

pop in a good lip watch the truck come to life wow

[revo_addict]

some progressive springs.. a bit work on the suspension and a farst steering servo will do the trick =)

[imported_ICSAM]

wrong link, i'll find the right one.

[ert]

Depends what you wanna to do i would either replace the stock motor with a brushless or re gear it i found my rustler is more powerful with a smaller pinion i run a 18 on mine and its a good balance. I'd also get some rpm A arms front and Rear, rpm over sized bearing carries front and rear. Proline has bead lock rims and some better tires now maybe play with the shock oil. If money isn't a problem a ball diff.

[KingCamber]

I know a lot of clubs are in the talks about racing these in a spec class next year. So if you are planning on racing them a lot the tunning and hop ups may be a waist.

[FearFerretRC]

Originally Posted by GRAVEDIGGER#28

pop in a good lip watch the truck come to life wow

DO NOT put a lipo in it................. the ESC CANNOT handle the lipo.... search in Sids Raceway and read the results of my lipo test :P

[imported_xxSLiMxx]

Heres a few tips and tricks in a post iv started over on the traxxas forums

http://monster.traxxas.com/showthread.php?t=445504

[John Bakker]

I found that playing with the shocks help tame the body roll .50wt in the front 40 wt in the rear ,3mm limiter inside and outside on the front and rear.This is my shock set up for Fastcats

[thrash metal]

alot of guys are using 2s lipos in their slashes with no issues.

a 2s lipo is only 7.4 v the stock esc can handle it. the only thing you have to be careful about when running a lipo is that the esc doesnt have a lipo cutoff setting so you have to keep an eye on your voltage to ensure you dont discharge it below 6 volts.