|09-10-2008, 06:52 PM||#1|
RCC Junior Contributor
Join Date: May 2007
Feedback: 0 / 0%
Total Props: 0
New 1/8 scale electric products from Castle
Remove this ad - become a site supporter!
2200kv and 2650kv motors based off NEU motors (MMM combos) - October 2008
2650 KV – Intended for 4S (16.8 Volt) operation. Ideal for 1/8th conversions. The 2650 is 67mm long.
2200 KV – Intended for 6S (25.2 Volt) operation. Incredible in monster trucks with up to 6S lipo packs. The 2200 is 75mm long. This is the bad boy!
Both motors come with a Neo rotor on a 5mm shaft as standard, not as an optional upgrade. Castle uses high end bearings for trouble free operation, and we’ve machined integrated cooling fins for that extra bit of power. These motors are 4 pole, slotted, brushless motors wound with 1 turn in a Y configuration.
Conversion Kits for Kyosho 777, Losi 8ight and Jammin - Christmas 2008
The conversion kits will include aluminum motor mounting plates, a servo mount and trick plastic battery bays capable of holding up to 4S Lipo setups.
5mm pinions - November 2008
CC PINION - MOD-1: manufactured from titanium coated hardened steel. Most common use will be for the 1/8th scale conversions. Available in 11T, 13T, 15T, 17T, 19T, 21T, and 23T.
CC PINION - 32P: machined from aluminum and anodized Castle green. Most common uses will be for monster trucks. Available in 18T, 20T, 22T, 24T, 26T, and 28T.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|