[Dangaras]

I am moving to larger packs, more than 6 cells so I need a charger that can handle more cells.

Great charger, can do 6 cell, 5000mAh in 20 minutes!


http://www.hobbyking.com/hobbyking/s...ersion_2_.html

The Turnigy Mega 400W V2 is a high power balancing charger/discharger which can handle up to 20A charge rates on 6S LiPo/LiFe and 18S NICD/NIMH accurately. Bundled with the Turnigy Mega 400W V2 is an array of charging wires and plugs, suitable for most applications.


Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH/NiCd)
Individual cell balancing charge & discharge
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
High-power and high-performance circuit
Store function, allows safe storage current
Data storage (Store up to 10 packs in memory)
Cyclic charging/discharging

Note: Temperature sensor not included.


Spec.
Input voltage: 11.0 – 18.0Volt
Charge current: 0.1 – 20.0A
Discharge current: 0.1 – 5.0A
Maximum charge capacity: 400W @ input voltage >15V
Maximum discharge capacity: 25W
Current drain for balancing Li-po: 200mAh/cell
Lithium (LiPo/LiIo/LiFe) battery cell count: 1 – 6 series
NiCd/NiMH battery cell count: 1 – 18 series
Pb battery voltage: 2 –24V
Battery setup memories: 10
Intelligent temperature control: Yes
Weight: 815g
Dimensions : 146x144x56mm

Including;
1 x Turnigy Mega 400W V2 charger
1 x JST XH Adapter
1 x Banana plug w/male XT60
1 x Banana plug w/bare Leads
1 x XT60 w/aligator clip
1 x XT60 w/female JST
1 x XT60 w/female Futaba
1 x Aligator clip for charger input leads

This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT,TURNIGY and any pack with a JST adapter.

Note: Power supply and temperature sensor not included.

================================================== =======
RCC Classified Quick Rules

- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
================================================== =======

[Dangaras]

Bump for a great power supply..

[gauiguy]

Hi just PM'd you

[Dangaras]

PM replied to.

[Dangaras]

Bumpity Bump..

[heman37]

Dangaras 584 points - 4/30/2013


Well I found another issue with Storage mode. On all of my other Turnigy chargers Storage mode does not care if the cells are below or above 3.8V/cell, they charge or discharge as necessary. With this charger if the cell is below 3.8V, the charger stops so the pack is below the correct storage value!! What a crock! I wonder how many batteries I have damaged because I put them away with one or more cells too low??? Another reason to recall this charger!

this is what I found when I went to get a review of this charger .right off of the hobbyking site. why would you rip someone off? take the loss and throw it out. sorry but I can not stand to see someone screwed over.

[Dangaras]

Originally Posted by heman37

Dangaras 584 points - 4/30/2013


Well I found another issue with Storage mode. On all of my other Turnigy chargers Storage mode does not care if the cells are below or above 3.8V/cell, they charge or discharge as necessary. With this charger if the cell is below 3.8V, the charger stops so the pack is below the correct storage value!! What a crock! I wonder how many batteries I have damaged because I put them away with one or more cells too low??? Another reason to recall this charger!

this is what I found when I went to get a review of this charger .right off of the hobbyking site. why would you rip someone off? take the loss and throw it out. sorry but I can not stand to see someone screwed over.

That's why I got a new one from them!

[heman37]

ok sorry my misunderstanding, just did not look good, and is this charger working right?

[Dangaras]

Sold Pending funds..

Thanks RCC