|05-29-2014, 04:40 PM||#1|
I am: Yvan D
Join Date: Sep 2011
Location: Terrebonne Quebec
Radio of choice:
# of RCs: 5
Feedback: 0 / 0%
Total Props: 2
Remove this ad - become a site supporter!
I've done some testing today.... bought some foam core balsa sheeted floats 42 inches slim....
Coated some balsa with Varathane water based semi-gloss, with 3/4 fiberglass cloth... 4 coats... sanded down with 220 grit sand paper between coats... whan fully cured.... i sanded agaian with 400 grit paper.... Then i've applied SEM's automotive Promax spray pain ... 2 coats... and wow the results were great.... The Balsa seems to be really sealed.....
Now, what do you guys think??
These are going to be on a Slipstream Beaver....
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|