E flite Power 15 Brushless Outrunner Motor, 840kV + 30amp ESC - RCCanada - Canada Radio Controlled Hobby Forum
RCCanada - Canada's Radio Control Hobby Forum
FS - Electric Gear Post your electric gear for sale here. Electric motors, batteries, ESCs, etc...

Closed Thread
Thread Tools Display Modes
Old 08-01-2014, 09:24 PM   #1
RCC Apprentice
I am: Jay M
Join Date: Jul 2014
Location: Ottaws ON

Feedback: 2 / 100%
Posts: 43
Total Props: 0
E flite Power 15 Brushless Outrunner Motor, 840kV + 30amp ESC

Power Plant: Electric
New or Used: Item is used but excellent condition.
Trades: No trades.
Asking Price: $45.00
Accepted forms of payment: EMT, Paypal
Shipping : I will ship, included in price.
My Location: Ottawa Ontario

       Remove this ad - become a site supporter!
The following was removed from the Apprentice S 15 after 3 flights

Will include the servos from the Apprentice. 1x Standard Servo and 1x 13g Sub Micro Servo

E Flite Brushless Outrunner Motor, 840kV
Product Specifications
Type: Brushless Outrunner (used in the Apprentice)
Size: .15
RPM/Volt (Kv): 840


30-Amp Pro Switch-Mode BEC Brushless ESC (V2)
Key Features

Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
3.5A continuous current, 5V Switch-Mode BEC Circuit
Stronger BEC for support of most 3-axis stabilization systems
Drive up to 7 analog or 6 digital standard-size servos with the BEC
3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
Programmable soft start for helis and airplanes
Auto motor shut down if signal is lost or there is interference
Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads

The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
Product Specifications
Continuous Maximum Current: 30A (proper cooling required)
Input Voltage: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
Input Connector Types: 16 AWG leads with E-flite EC3 Connector
Output Connector Types: 16 AWG leads with 3.5mm Gold Bullet Connectors
Momentary Peak Current: 35A (15 sec)
Length: 51.0mm (2.00 in)
Width: 28.0mm (1.10 in)
Height: 8.70mm (0.35 in)
Weight: 31.0 g (1.10 oz)
Wire Gauge: 16 AWG


================================================== =======
RCC Classified Quick Rules

- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.

================================================== =======
jdm85 is offline  

Sponsored Links - Subscribe to remove this ad.
Old 08-10-2014, 02:25 PM   #2
RCC Apprentice
I am: J S
Join Date: Sep 2012
Location: Orleans, ON
Radio of choice:
Spektrum DX9
# of RCs: 40

Feedback: 22 / 100%
Posts: 87
Total Props: 2
Re: E flite Power 15 Brushless Outrunner Motor, 840kV + 30amp ESC

PM sent a few days ago, no reply. I will take the motor and ESC. I can pickup locally.
surfmonster is offline  
Old 08-11-2014, 06:33 PM   #3
RCC Apprentice
I am: Ralph K
Join Date: Apr 2013
Location: Lamont Alberta
Radio of choice:
JR 11X& Devo 10 with deviation firmware
# of RCs: 7

Feedback: 0 / 0%
Posts: 36
Total Props: 0
Re: E flite Power 15 Brushless Outrunner Motor, 840kV + 30amp ESC

Is this still available?
rkozak is offline  
Closed Thread

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
vBulletin Message

Thread Tools
Display Modes

Forum Jump

All times are GMT -5. The time now is 12:23 AM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.