|08-25-2014, 06:42 PM||#1|
RCC Senior Contributor
I am: Rick K.
Join Date: Jan 2008
Location: Chesley Ontario
Radio of choice:
# of RCs: 5+
Feedback: 4 / 100%
Total Props: 1
JR 9503 bind issue?
Remove this ad - become a site supporter!
Finally, finnaly got a catch to go flying the other evening. Went to start my 35cc yak. Wouldn't start.
Long story short, the throttle servo was out of whack. Half stick was low throttle. Loaded up and went home. Can't say that the trip was for nothing because I met a new group of fellow flyers! Great guys! (Saugeen club)
Took the plane apart at home thinking that something had moved or slipped. Nothing had.
For some reason the programming in the TX or RX moved, WHY!!! Since then, I have set it back up, to work as it should. And it holds. ( I should add that it has been fine for about 18 ten minute flights before it moved )
I'm flying a JR 9503 with a 921rx on 6.6 volt life batteries. I don't use a switch to power up the RX, just plug in the battery.
I have had one very new plane turn it's self into a powered balsa tree because of a radio problem, and I don't want that to happen again!
Last edited by -Rick-; 08-25-2014 at 07:04 PM. Reason: add
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|