|11-03-2014, 09:13 PM||#1|
RCC Junior Contributor
I am: Peter P
Join Date: Oct 2013
Location: Richmond Hill Ontario
Feedback: 16 / 100%
Total Props: 0
E-Flite Power 60 BL 400Kv & E-Flite 60A ESC
Model Number: power 60 & 60a e
Power Plant: Electric
New or Used: Item is used but excellent condition.
Trades: I am interested in possible trades.
Asking Price: $149
Shipping : I will ship at buyers expense.
My Location: l4e4s4
Remove this ad - become a site supporter!
Great Deal $149 For the Pair!!
Power 60 Brushless Outrunner Motor, 400Kv
•Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
•Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
•Ideal for models requiring up to 1200 watts of power
•High-torque, direct-drive alternative to inrunner brushless motors
•Includes mount, prop adapters and mounting hardware
•External rotor design—6mm shaft can easily be reversed for alternative motor installations
•Slotted 14-pole outrunner design
•High-quality construction with ball bearings and hardened steel shaft
•Quiet, lightweight operation
Type: Brushless outrunner
Size: Replacement for 60-size glow engines
Bearings or Bushings: One 6 x 15 x 5mm Bearing, and Two 6 x 12 x 4mm Bearing
Wire Gauge: 14
Recommended Prop Range: 14x8 to 16x10
Voltage: 18.5 to 28.8
RPM/Volt (Kv): 400
Resistance (Ri): .06 ohms
Idle Current (Io): 2.70A @ 10V
Shaft Diameter: 6mm (.24 in)
Overall Length: 62mm (2.40 in)
Weight: 380 g (13.0 oz)
Overall Diameter: 50mm (2.00 in)
Diameter: 50mm (2 in)
Length: 62mm (2.4 in)
Continuous Current: 55A
Maximum Burst Current: 65A (15 sec)
Cells: 16–24 Ni-MH/Ni-Cd or 5–7S Li-Po
Speed Control: 60A brushless
60-Amp Pro Switch-Mode BEC Brushless ESC
•Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)
•5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)
•Stronger BEC for support of most 3-axis stabilization systems
•Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
•3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
•Finned heat sinks
•Programmable motor braking
•Safe power-arm mode prevents accidental starts
•Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
•Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
•Programmable soft start for helis and airplanes
•Auto motor shut down if signal is lost or there is interference
•Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
•Utilizes new smaller MOSFET technology to minimize weight
•Radio system power on/off switch
•Pre-wired connectors on battery input and 3.5mm gold bullet connectors on motor output leads
Continuous Maximum Current: 60A
Input Connector Types: 13 AWG with E-flite® EC3™ connector
Output Connector Types: 13 AWG with 3.5mm gold bullet connectors
Momentary Peak Current: 15 sec @ 75A with proper cooling air flow
Length: 2.85 in (73.0mm)
Width: 1.30 in (33.0mm)
Height: 0.61 in (15.5mm)
Weight: 2.65 oz (75.0 g)
Cells w/BEC: 3–6S Li-Po or 9–18 Ni-MH/Ni-Cd
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
Last edited by ppalumbo; 11-04-2014 at 12:07 PM.
|e-flite , Power 60 & 60A ESC , power 60 & 60a e|
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|