|05-25-2015, 09:52 PM||#1|
I am: Nick
Join Date: Jul 2010
Radio of choice:
# of RCs: 6
Feedback: 4 / 100%
Total Props: 0
ZTW GECKO 45 amp ESC
Power Plant: Electric
New or Used: Item is new, unused
Trades: No trades.
Asking Price: $45
Accepted forms of payment: EMT, Cash
Shipping : I will ship at buyers expense.
My Location: m1p0a9
Remove this ad - become a site supporter!
2 Brand New ZTW GECKO 45AMP ESC $45 EACH!
OR Both for $80
ZTW GECKO SERIES Airplane/Heli ESCs are competition-grade speed controllers from one of the most trusted RC electronics manufacturers in the industry. NEW FEATURES found in Gecko Series ESCs include PC data logging, firmware upgradability, and a larger SBEC. Best of all, Gecko Series ESCs come standard with the ZTW quality, performance, and reliability you have come to trust.
The high power SBEC found in ZTW Gecko Series ESCs has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.
Data logging via PC interface (optional accessory included with program card)
Firmware upgradable via PC interface
High SBEC current output: 5A continuous
Adjustable SBEC voltage up to 6.0v (up to 8.4v on 65A and above models)
Extremely low internal resistance
Smooth and accurate throttle linearity
Power arming protection, over-heat protection, low-voltage protection and lost signal protection
Supports high RPM motors
Advanced governor mode and soft start
Optional programming card & PC USB interface available
Output: 45A continuous, 65A burst for 10 seconds
Input voltage: 2-6s LiPo; 5-18 cell Ni-XX
SBEC output: 5.0v/6.0v adjustable @ 5A (switching)
Dimensions: 59 x 33 x 11.5mm
Brake setting (off / soft / mid / hard -- default: off)
Battery type: (Ni-XX / LiPo / LiFe -- default: LiPo auto detect)
Cut-off voltage threshold (2.8V 50% / 3.0V 60% / 3.2V 65% / No protection -- default: 3.0V 60%)
Factory default setup reset
Timing settings (auto / 2° / 8° / 15° / 22° / 30° -- default: auto)
SBEC Voltage Output (5.0v / 6.0v -- default: 5.0v)
Governor mode: (RPM off / 1st Soft Start / 2nd Soft Start / Gov Mode 1 / Gov Mode 2 -- default: RPM off)
Motor rotation: (forward / reverse -- default: forward)
Start up (Low / Mid / High-- default: 30%)
LVC cut-off type: (reduce gradually / cut-off -- default: reduce gradually)
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|