|10-17-2003, 10:45 PM||#1|
Join Date: Dec 2002
Location: Thorold, Ont.
Feedback: 0 / 0%
Total Props: 0
SUKHOI SU 26 "TAKEN OFF THE MARKET"
Remove this ad - become a site supporter!
This is a completely built ready to cover CG Sukhoi. INCLUDES: Fiberglass cowl and belly pan and modified landing gear mounting system. It is very well built by an experienced modeler.
Landing gear modification:
I strengthened the wing spar, center and #2 wing ribs with high quality aircraft ply, not pulpy lite ply.
Hardwood blocks were glued onto the newly strengthened spar, center and #2 wing ribs and leading edge creating a very strong box structure.
To take advantage of the large box structure, the landing gear plywood plate was enlarged and glued to the hardwood blocks.
Two plywood "tongues" are glued onto the new box structure right through to the spar. The two "tongues" protrude through the leading edge of the wing for fuselage attachment.
The plywood tongues are bolted to a strengthened fuselage brace. The landing loads are now absorbed by the fuselage and the strengthened box structure in the wing rather than just the wing in the original plans.
3" Lite Wheels, 3" Aluminum spinner, GWS On-board lighted Voltage indictor, Robart Ultra Fueler and very good quality hardware, not the original from the kit. Pull pull rudder and carbon fiber elevator push rod system.
I am asking $350 for this set up.
THUNDER TIGER 120 HAS BEEN SOLD!!
Reason for selling is the fact that I am going into larger gas engine planes for IMAC.
I am located in Thorold Ont. near St Catharines. Can deliver within the Toronto, Woodstock and Niagara area.
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|