|07-14-2004, 06:46 PM||#1|
RCC Supreme Contributor
I am: Lee P
Join Date: Dec 2002
Feedback: 1 / 100%
Total Props: 9
Futaba 7UAP Vs 7UAPS
Remove this ad - become a site supporter!
As you can gather from the title I have both radios but I am having a dilemma with program mixing.
I have both radios set up to slave channel 6 to channel 1 for dual aileron servos, but my aileron trim switch for the 7UAP only moves the channel 1 servo, while it moves both Channel 1 and 6 servos with my UAPS.
Needless to say trying to trim for roll with only one aileron is a lousy way to go Any suggestions?
|07-15-2004, 09:24 AM||#2|
RCC Pro Contributor
I am: kevin w
Join Date: Sep 2002
Location: Sault Ste marie,Ont. Canada
Feedback: 0 / 0%
Total Props: 1
Lee..........when you say "trim switch" do you mean the regular digital trim on the face of the TX,that controls aileron trim?
If so its not a TX problem but rather a programming one and off the top of my head read the fine print carefully regarding servo travel and direction when slaving chnl six to chnl one...........I am not a programming expert but when I get stumped I go back and repeat the basics step by step until I solve the problem.
Also you could go here
and ask the question in the FAQ/contact us area.........
The Planet is doing what it has always done.......floods,volcanic eruptions storms,
earthquakes.........but today there are more people in the way.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|