[ddowns99]

Howdy all!
I can't find anywhere on my plans RC48 anything referencing the recommended control throws for this aircraft. Can anyone help?

[rcav8r71]

Control Surface Movements
Elevator 34° Up 29° Down
Rudder 30° Left 30° Right
Aileron 18°Up 18°Down
Stabilizer 2.5°Up 4°Down
These are taken directly from TCDS A-691 and work very well as a starting point. I figure, if it works on the real one, it'll work on a smaller one.

[tommy]

On a Hanger 9 ARF Cub 1/4 scale they are Ail 5/8 up 1/2 down. Ele 7/8 up. 7/8 down rdr 1 1/2L, 1 1/2R. Maybe use these as a start point. Or cut the ele to say 1/2 or 5/8. This is just a guess to get in the air. I built a 1/5 scale and it lifted without a command at the proper speed on takeoff.

[ddowns99]

Thanks, guys, this is exactly what we needed!!

[ddowns99]

Originally Posted by tommy

On a Hanger 9 ARF Cub 1/4 scale they are Ail 5/8 up 1/2 down. Ele 7/8 up. 7/8 down rdr 1 1/2L, 1 1/2R. Maybe use these as a start point. Or cut the ele to say 1/2 or 5/8. This is just a guess to get in the air. I built a 1/5 scale and it lifted without a command at the proper speed on takeoff.

Thank you!! dd

[tommy]

I was in Tower Hobbies so I looked for Sig 1/4 scale and found a clipped wing and in the tech dept. I found aileron 2" rudder 1 3/4" elevator 1 3/8". I go here a lot to find information similar for most planes. Thanks to Tower it's a big help!