|04-29-2005, 06:32 AM||#21|
RCC Master Contributor
I am: Bob H
Join Date: Oct 2002
Location: Mississauga, Ontario
Feedback: 0 / 0%
Total Props: 0
Remove this ad - become a site supporter!
If it is available plug the second battery pack into channel 5. ( the only Rx-s i can think of that don't have a channel 5 retract port ar 4 channel Rx-s.
Anyway, if all the ports on the RX are used, and you are concernerd about a single plug for the batteries plugging into the receiver (assuming you used a "Y" harness for 2 packs with their attendant harnesses) here is a way around your problem...
Put the "Y" harness onto any port, ( I suggest the throttle servo).
Plug the main plug of the "Y" into the throttle port on the receiver. Plug the throttle servo into one of the plugs on the "Y" and the second battery pack into the other plug on the "Y".
Bob Hudson, MAAC 9709L
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|