|06-17-2005, 05:13 PM||#1|
SOLD 5s3p 6600mAh Lipo pack with balance module
Remove this ad - become a site supporter!
F/S 5s3p 6600mAh Lipo pack with balance module
This pack has only been used for about 5 cycles. I ended up going with a 6s setup.
Selling for only $225 shipped anywhere in Canada
Advanced battery Prismatic Li-Polymer based on the 2200mAh cells.
Battery Pack 18.5V/6.6Ah, 5S3P, and BMM*
*BMM (Battery Management Module) will balance each cells at each charge cycle, allowing to have perfectly balanced cells and though increasing cycle life of your pack.
Pack Thickness X W X Length = 33 X 46 X 330
Weight = 725 gr (25.5oz) +/-15 gram
Rated Capacity = 6.6Ah
Nominal Voltage = 18.50V
Max. continuous discharge current (52A), burst (79A)
More info on suppliers site:
For more info, email direct at email@example.com
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
|06-17-2005, 11:04 PM||#7|
The pack is configured with the cells 'end to end'
They can easily be rewired to be 'side to side' for a shorter/wider pack or 'stacked' for a stubby block. I have seen these cells configured as a block and that would probably be best for a plane.
Reconfiguring the pack would be just a matter of removing the shrink covering, re solder and then re shrink.
You would not want to seperate into 2 packs as the balance module connects to each set of cells.
The balancer has a ground and one wire per 'tap'
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|