|11-25-2005, 08:51 PM||#1|
RCC Senior Contributor
FS: H9 Funtana90***SOLD***
Remove this ad - become a site supporter!
For sale: Hanger 9 Funtana 90
Plane is about one year old, with approximately 20 flights on the airframe. Reason it has so few flights was that I had difficulty setting up the YS120SF for reliable peak output. When it was tuned the plane was awesome; lots of fun. I originally had a YS 120SF on it, which mounted up in the stock location. It now has a OS 1.60FX with a Perry pump. The engine mount had to be widened slightly to accommodate the larger engine, however the original location can still be utilized. Plane is in good shape with only a small puncture in the covering on the counterbalance of the elevator. I just ironed on some covering to prevent it from spreading, about a ½” square. Is not the correct colour yellow though. Also I will include the cowl but it is in rough shape as it has been cut for two different engines. Part number from GH : HAN2682
Setup: 5 HS 625MG servos (1 on rudder, 2 on elevators, 2 on ailerons), standard Futaba s3003 on throttle. OS1.6FX with bisson pitts and Perry pump, Hitec 7ch select shift rx, MPI HD extensions, Hitec switch, 2100mah 5cell NiMH pack, and standard included hardware from H9, APC 18X6W prop and a Vortec 3” spinner.
I want to sell this in either two ways:
Airframe, all servos, extensions, linkages and hardware. $350 + shipping.
Charge and fly, completely turnkey. Add your crystal and go. $700 + shipping.
A short video can be found here (With the YS120 installed)
I’m located in Saint John, NB. Local sale would be ideal but shipping can be arranged, if I have time to crate.
If serious please PM.
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
|11-25-2005, 10:13 PM||#4|
RCC Expert Contributor
Join Date: Jun 2003
Location: Petitcodiac, New Brunswick
Total Props: 0
I've see this plane personally and it's in really great shape. That OS160 has tons of power for that airframe...uplines are no problem at all. Everything works as it should as it is a good setup. Good chance to get a good deal on a nice turnkey F90...
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|