|08-27-2008, 06:29 PM||#1|
RCC Senior Contributor
I am: Jerry Kutra
Join Date: Jul 2007
Location: Halifax NS
Feedback: 0 / 0%
Total Props: 0
New AP/AV heli
Remove this ad - become a site supporter!
Here something new I'm working on. The ship is a 600 size mechanical.
First test flights are going well. She's lifting off at 8.6lb with a current draw of 16 amps in the hover. I have been getting 6 minute of flight time out of the 4400mah 6S battery at 66% speed control 1800 rpm on the 550mm blades. The battery use about 80% at this point.
So far she is very nice stable platform with adequate power. I hope to get some camera operations soon. Here some pic's of the 2 ch camera control complete with downlink and monitor that I have fitted for this system.
Here’s the first video, some small vibration but still quite happy with the system. I have short video of some results from today. Tell me what you thing about the system. I have post raw and deshaked video.
Had a bit of crash brain fart left the tx on the wrong model. Opps! rev pitch and rudder
Hard job competing with gravity.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|