|
|
General RC Heli Discussion Discuss general topics on rotary wing aircraft, including construction, Servo's, Gryo's and Stabilizer discussions. |
|
Thread Tools | Display Modes |
01-28-2009, 08:03 PM | #1 |
RCC Contributor
I am: Keith G
Join Date: Feb 2007
Location: STRATHROY ONTARIO
Radio of choice:
JR 9303 2.4 # of RCs: 5
Feedback: 2 / 100%
Posts: 334
Total Props: -21
|
raptor 90 standerd
hi guy's what 's the best set for a raptor 90 here's what I have so far OS 91 non pumped JR 3/8717 futaba 1/3151 futaba 611 gyo and tail sevro combo and a hatrio 18 tune pipe . should I run the servo's at 6V ?? and if so what reg is the best to go with ? and should get a futaba GV-1 govener ? I am thinking getting ready for the year ! its time to move up from a raptor 50 se and a titan
|
. |
Sponsored Links - Subscribe to remove this ad. |
|
01-28-2009, 08:56 PM | #3 |
RCC Master Contributor
I am: Colin B
Join Date: Jun 2003
Location: Nova Scotia
Radio of choice:
Futaba Feedback: 0 / 0%
Posts: 1,282
Total Props: 13
|
Re: raptor 90 standerd
C'mon Carlyle, that craptor can out fly any time haha
Keith, If you already have the R90 std, I definitely recommend a metal head block... sounds like you're planing on doing 3D, based on the equipment you have. 6-7V is what those servos work best on. The SGP Reactor and Arizona Heli regulator are most popular, and work really well. As for a governor, I'd recommend the ATG V3. Hope this helps, Colin
__________________
Great Hobbies, OMG Servos, Advanced Radio |
. |
|
|
01-28-2009, 09:08 PM | #4 | |
RCC Master Contributor
I am: Gordon
Join Date: Jun 2007
Location: Toronto, Ontario
Radio of choice:
Spektrum DX9 BE, DX3R & DX3S # of RCs: 30
Feedback: 17 / 100%
Posts: 1,182
Total Props: 3
|
Re: raptor 90 standerd
Quote:
Running a governor would require you to break-in the engine and be properly tuned before the governor is active. I would suggest the Aerospire Multigov Pro. For sport flying with my X-90, I run 3 x 8717, for the cyclic, with the SG Reactor X at 6v, a Multigov Pro, a Spartan DS-760 gyro/JR-8900G servo, finally, a YS 91SR long stroke with the Hatori SB19FH pipe. With the regulator set a 6.8v, the 8717 servos are lightning fast! I set the regulator to 6.8v when I am alert and awake!! Most important, spend time at setting up your mechanics and links. If these are close to perfect, you would require less electronic/radio setting up and adjustment. And, have FUN! Thanks, Gordon
__________________
Enter the World of Ballroom Dance... www.ballroomdancelessons.ca All for One, One for All... www.scarboroughfencing.on.ca RC: Nitro and Electric Helicopters, Planes, Cars, and Trucks; Non-RC: Ballroom Dance and Fencing! MAAC 77725 Last edited by Jiver; 01-28-2009 at 09:10 PM. |
|
. |
01-28-2009, 09:15 PM | #5 |
RCC Contributor
I am: carlyle anderson
Join Date: Aug 2005
Location: Stratford, Ontario
Feedback: 0 / 0%
Posts: 329
Total Props: 0
|
Re: raptor 90 standerd
That was a total typo colin! Look at your keyboard, see how close the C is to the R?
Keith, what radio are you going to be using for this heli?
__________________
you don't need CNC if you are handy with a torch. |
. |
01-29-2009, 05:32 PM | #8 |
RCC Contributor
I am: Keith G
Join Date: Feb 2007
Location: STRATHROY ONTARIO
Radio of choice:
JR 9303 2.4 # of RCs: 5
Feedback: 2 / 100%
Posts: 334
Total Props: -21
|
Re: raptor 90 standerd
hey Carlyle I have a new JR 9309 2.4g and it works much better the the futaba 9c that you and eveyone else had problems programing it ! the radio is the cats %%^ sure happy that I got one befor the price went up !
|
. |
02-02-2009, 10:14 PM | #9 |
RCC Contributor
I am: carlyle anderson
Join Date: Aug 2005
Location: Stratford, Ontario
Feedback: 0 / 0%
Posts: 329
Total Props: 0
|
Re: raptor 90 standerd
Nice Keith. That will treat you very well.
Take your time with this build and insure everything is right. I'm not sure if you've had a 90 sized machine before, but this will be a big step. You are really going to enjoy flying your raptor 90.
__________________
you don't need CNC if you are handy with a torch. |
. |
02-03-2009, 06:01 PM | #10 |
RCC Contributor
I am: Keith G
Join Date: Feb 2007
Location: STRATHROY ONTARIO
Radio of choice:
JR 9303 2.4 # of RCs: 5
Feedback: 2 / 100%
Posts: 334
Total Props: -21
|
Re: raptor 90 standerd
thanks Colin and Carlyle for the helpful tips! this is my first 90 size heli and want to make sure that I am getting all the right parts for . I was thinking of getting a SG Reator X. Iam still looking into the governor ! is the ATG V3 a good one too get for now or is there better one's ? The engine is broke it ! What metal head should I get ? the raptor upgraded head or should I go all out and get a kasma head ? I bought the raptor 90 metal tail gear case and the SE pushpull set up up are there any more upgrades that I should get ??
|
. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|