|07-29-2009, 07:53 AM||#1|
RCC Junior Contributor
Join Date: Mar 2008
Feedback: 0 / 0%
Total Props: 0
JR x9303, spektrum ar500 flaperon setup
Remove this ad - become a site supporter!
Hey boys and girls, I am having a brain dumb dumb trying to set up a H9 super stick with flaperons using a spektrum ar500 receiver. I have studied the manual and have tried numerous setting but I can not get the right aileron to move in the right direction when the flap switch is hit. The Spektrum AR500 has a second aileron port but no trim. It also has a gear port, and that's what I have been trying to use to mate/mix with the ch2 aileron port. radio is a JR X9303. Is it possible with the AR500???
JR 2.4 GHz
Top-Flite F4U Corsair w/RCV 120sp
Top-Flite P47 Thunderbolt
Hangar 9 Extra 260 / DLE 55
Member of the C,I,S, (Chinese Import Society)
WHAT DO YOU MEAN I HAVE CONTROL!!!!
|07-29-2009, 09:16 AM||#2|
Join Date: Sep 2003
Location: Georgetown Ont
Feedback: 1 / 100%
Total Props: 1
Re: JR x9303, spektrum ar500 flaperon setup
Manual not handy but: I believe one aileron is plugged into 2 and the other in a spare channel with the spare slaved to 2.
If you can't get them reversed so they work properly, switch the servo connection at the RX from aileron 2 to the spare and the spare to aileron 2 (reversing servo to opposite channel).
Now try reversing the servo (if it doesn't already move properly after changing which channel they are plugged into in the RX).
This explains it differently:
http://www.rcuniverse.com/forum/m_79...tm.htm#7930495 The RX doesn't matter.
Last edited by voyager_663rd; 07-29-2009 at 09:26 AM.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|