|11-09-2009, 03:51 PM||#1|
I am: Greg P
Join Date: Jan 2006
Location: Grande Prairie, Alberta
Feedback: 4 / 100%
Total Props: 2
Western Robotics High Current 5amp BEC (x2)
Remove this ad - become a site supporter!
Western Robotics High Current 5amp BEC
Compact high efficiency 5.0V, or 6V selectable voltage
Wide input voltage range from 9V to 45V. (Min. 10V for 8.4V
output) (8-30 NiCd/NiMH or 3-10 LiPo Cells)
High current capability of 5 Amps continuous.
High power output that handles multiple servos including
LED status indicator gives visual feedback.
High power patented toroid coil technology that provides the
least Electro-Magnetic Interference.
Laboratory burn-in tested at excess of 5 Amp, 40 Volt input
continuous load for 48 hrs of uninterrupted operation (under air
Recommended for 2.4GHz radio systems.
These came in an airplane that I bought RTF. Unfortunately after reading the fine print I found out that they are not recommended for use with old school 72mhz Rx's. So if you are running 2.4, here is a redundant setup to power your aircraft with.
These are wired in parallel to give 10 amps continous at 40v input, and to provide redundancy.
Note: the versions that are for sale are not the latest version on the link. The one's for sale are only selectable between 5v and 6v.
Sold! Thank you.
RCC Classified Quick Rules
- Location & price is a must when selling RC related items. Update your profile!!!
- Use the feedback system after a sale / trade.
- Buyer Beware!
- One bump / TTT every 3 days.
- Classified rules here.
** Infractions will be passed out if rules are broken. Threads may be deleted.
Last edited by g.p.; 11-09-2009 at 07:03 PM.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|