|01-30-2010, 09:47 PM||#11|
RCC Supreme Contributor
I am: Mike s
Join Date: Sep 2005
Location: Moncton, NB
Feedback: 11 / 100%
Total Props: 9
Re: Futaba 12FG instruction manual
Remove this ad - become a site supporter!
Here is how I would do it:
Mix Left rudder into Right engine (throttle channel) so when you give the input the engine increases ( not decrease because you may be at idle and kill the engine)/
Mix Right rudder into Left engine (channel 6)so the engine RPM increases when you input the right rudder.
You can do this by using 2 separate mixes.
Copy everything to a blank condition and rename it taxi, assign a switch to that condition.
Activate the Taxi condition and you should see it your screen. check everything copied okay.
Go Back to your normal condition for flying and inhibit all the mixing.
Hope this helps?????/
Once you get this done anything else will be easy. It really is a powerful radio for programing, yes complicated but once you figure out everything out it works great.
|Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)|