RCCanada - Canada Radio Controlled Hobby Forum - View Single Post

black · 01-20-2021, 08:34 AM

Not overkill, but a choice. It is better to have a bit of overhead in the BEC capacity. You could remove it and run Rx on 5V but I would recommend using the Castle BEC. Just make sure to remove or cut the red wire from the throttle connector.

01-20-2021, 08:34 AM	#2
black RCC Contributor I am: Joe B. Join Date: May 2013 Location: Hamilton ON Radio of choice: futaba # of RCs: 7+ Feedback: 5 / 100% Posts: 293 Total Props: 2	Re: Hurc and BEC Not overkill, but a choice. It is better to have a bit of overhead in the BEC capacity. You could remove it and run Rx on 5V but I would recommend using the Castle BEC. Just make sure to remove or cut the red wire from the throttle connector. __________________ MAAC # 12443 700 size Bell222, Bergen Intrepid EB, LOGO 700 and assorted odds & ends. yes I even have a few planks including a couple Turbines! Almost all electric. All controlled by Futaba.