RCCanada - Canada Radio Controlled Hobby Forum - View Single Post

volksman · 05-09-2019, 09:21 AM

i have one of the british made engine test stand. have a 22inch truck rim with 3 inch square tubing weled to a plate which is welded to the rim. a 5 inch mechanic vice mounted to the post. a 2x4 is screwed to a piece of plywood with the test stand mounted to the plywood. big gas engines get mouted to a 2x6 clamped in the vice. not going to pull this thing over. work mate can be upset with a good 120 two or 4 stroke.

05-09-2019, 09:21 AM	#11
volksman RCC Master Contributor I am: robert j Join Date: Dec 2002 Location: vernon bridge, pe Feedback: 6 / 100% Posts: 1,047 Total Props: 16	Re: Engine Test Stand i have one of the british made engine test stand. have a 22inch truck rim with 3 inch square tubing weled to a plate which is welded to the rim. a 5 inch mechanic vice mounted to the post. a 2x4 is screwed to a piece of plywood with the test stand mounted to the plywood. big gas engines get mouted to a 2x6 clamped in the vice. not going to pull this thing over. work mate can be upset with a good 120 two or 4 stroke.